中文 |

V31 Auto Scanner

Equipped with an advanced Vehicle Communication Interface (VCI), the V31 Intelligent Auto Diagnostic System makes the diagnosis easier for workshops and technicians.
The software supports built-in procedures performed like coding controllers, adaptations injectors, programming keys, burning DPF like.
Extensive vehicle coverage: over 20000+ Asian, American and European makes and Chinese makes, compatible with the latest models, compatible with both OBDI and OBDII cars, SUVs, minivans, light-duty trucks sold worldwide

Features of the V31 Auto Scanner

-----------V31 European Software Description--------------

Functions and Features

  • Read fault codes
  • Clean fault codes
  • Read real-time parameters
  • Component activation test
  • Component adaptations
  • Fault codes shown with available information
  • Read vehicle information (VIN, ECU)
  • ECU Coding
  • ECU Programming
  • Diesel engine, Gasoline engine, ABS, EDL, ASR, ESP, AIR-BAG, immobilizer
  • Instrument cluster, door electronics, steering column, and battery control
  • Vehicle electrical control unit - BCM, trailer function AHF, Radio-navigation
  • Special Functions List
  • Maintenance
  • Driver
  • Body
  • Car/Key memory
  • Chassis
 

  • Delete transport mode
  • CBS correction vehicle data
  • CBS reset
  • – engine oil
  • – Microfilter
  • – Front brake
  • – Rear brake
  • – Diesel filter
  • – Coolant
  • – Spark plugs
  • – Brake fluid
  • – Vehicle check
  • – Exhaust emission inspection

  • EGS transmission control
  • – Adjustment
  • – Clear adaptations
  • – Disable/Enable key
  • Electronic car immobilization system
  • – Clear adaptations
  • CAS car access system
  • – Sunroof initialization
  • Diesel electronics
  • – Run-in protection for A/C compressor
  • – Drain/fill the refrigerant circuit
  • Digital motor electronics
  • – Initialize power windows
  • – Run-in protection for A/C compressor
  • – Drain/fill the refrigerant circuit

  • FZD Function center,roof
  • – Sunroof initialization
  • IHKA Integrated automatic heating/air conditioning
  • – Run-in protection for A/C compressor
  • – Drain/fill the refrigerant circuit
  • Initialize power windows
  • – Initialize power windows
  • Instrument cluster
  • – Reset service interval indicator
  • Light check module
  • – Read out operating data
  • JBE Junction-box electronics
  • – Rain/light sensor initialization
  • PM Power module
  • – Display history of battery replacement
  • – Register battery replacement
  • – Register battery change
  • Chassis
  • Dynamic drive
  • – Start start-up
  • – Learn sensor values
  • EMF Parking brake
  • – Renewal of an actuator on brake-caliper
  • – Renewal of the brake caliper or brake pads
  • – Initialization
  • – Startup
  • – Workshop mode
  • Wheel-slip control system
  • – Longitudinal acceleration sensor adjustments
  • – Bleeding procedure
  • – DSC unit adjustment
  • – Adjustment steering angle sensor
  • – Adjustment transversal-acceleration sensor
  • – Mix-up checks, brake lines
  • – Bleed Routine

  • Automatic locking\car
  • Automatic locking\key 1
  • Automatic locking\key 2
  • Automatic locking\key 3
  • Automatic locking\key 4
  • A/C on with ignition on key 1
  • A/C on with ignition on key 2
  • A/C on with ignition on key 3
  • A/C on with ignition on key 4
  • Auto fan control on with ignition on Key 1
  • Auto fan control on with ignition on Key 2
  • Auto fan control on with ignition on Key 3
  • Auto fan control on with ignition on Key 4
  • Automatic driving lights control
  • Arming/disarming
  • Arm visually
  • Arm acoustically
  • Arm visually doors/lids closed
  • Arm acoustically doors/lids
  • closed
  • Compartment sensor
  • Convenient closing RC
  • Convenient opening RC
  • Correction set temperature
  • Daytime driving lights (ECE)
  • Daytime driving lights (US)
  • Disarm visually
  • Disarm Acoustically
  • Driver's window\One touch open
  • Driver's window\One touch close
  • Easy entry steering wheel\Longitudinal
  • Easy entry steering wheel\Tilting
  • Entrance aid, tilt direction
  • Home lights duration
  • memory of heat/AC/ventilation
  • Mirror folding
  • Soft on/off
  • Start windows initialization
  • Relock 2 minutes after unlocking if doors unopened\key 1
  • Relock 2 minutes after unlocking if doors unopened\key 2
  • Relock 2 minutes after unlocking if doors unopened\key 3
  • Relock 2 minutes after unlocking if doors unopened\key 4
  • Rear window driver's side\One touch open
  • Rear window driver's side\One touch close
  • Rear window passenger's side\One touch open
  • Rear window passenger's side\One touch close
  • Recirculated air memory
  • Set fan power
  • Seat/memory position
  • Selective central locking/convenient access\car
  • Selective central locking/convenient access\key 1
  • Selective central locking/convenient access\key 2
  • Selective central locking/convenient access\key 3
  • Selective central locking/convenient access\key 4
  • Tilt sensor
  • Passenger's window\One touch open
  • Passenger's window\One touch close
  • Unlock, on removal of RC
  • Volume level

  • Dynamic drive
  • – Start start-up
  • – Learn sensor values
  • EMF Parking brake
  • – Renewal of an actuator on brake-caliper
  • – Renewal of the brake caliper or brake pads
  • – Initialization
  • – Startup
  • – Workshop mode
  • Wheel-slip control system
  • – Longitudinal acceleration sensor adjustments
  • – Bleeding procedure
  • – DSC unit adjustment
  • – Adjustment steering angle sensor
  • – Adjustment transversal-acceleration sensor
  • – Mix-up checks, brake lines
  • – Bleed Routine

Functions and Features

 

  • Initial startup
  • Calibration of the plunger travel sensors Level calibration
  • Load adjustment

  • Read coding and change if necessary
  • Radio parameters
  • TV parameters(Shut off criteria)
  • Restart of optical ring

  • Road test
  • Erase zero point offset error of component N49(steering angle sensor)

  • Display of coding data
  • Read coding and change if necessary

  • Initial startup: EZS
  • Initial startup: ESL [ELV]. Disabling of key or key track with workshop key.
  • Disabling of key or key track. Re-enabling of key or key track.
  • Writing of vehicle identification number. Teach in of a spare key.
  • Activation of control unit 'N73(Electronic ignition lock control unit).

  • Initial startup

  • Control unit reset

  • Display of coding data. Volume and frequency
  • Width of license plate bracket Trailer hitch
  • Read coding and change if necessary

  • Control unit adaptations

  • Initial startup

  • Deactive system Active system
  • bleed brake system
  • Control unit adaptations

  • Read coding and change if necessary
  • Zero position adjustment of axle or level sensors

  • Variant coding
  • Lower or raise head restraints
  • Read coding and change if necessary

  • Transmit key ID to control unit N2/11(Supplemental restraint system(SRS)
  • Interlock control module
  • Reset ECU
  • Read coding and change if necessary Coded vehicle data
  • Read coding and change if necessary Steering variant
  • Control unit adaptations
  • Display coded vehicle data

  • Initial startup
  • Control unit adaptations Learn air conditioning Adaptations
  • Diagnosis routines
  • Read coding and/or transfer download to new control unit
  • ETC52/ETC53
  • Coding according to plant data Display adaptation data
  • Resetting of adaptation data Performing adaptation
  • Actual values : Oil level check Transmission oil temperature Emergency running
  • Shift points
  • PWM solenoid valve 'Torque converter lockup clutch' : Shut off
  • Switch off the incline recognition for dynamometer mode

  • Road test
  • Learning processes
  • Control unit adaptations
  • Resetting of variant locking

  • Partially electric seat adjustment

  • Control unit adaptations

  • Read coding and change if necessary
  • Normalize left power window
  • Initialization of power closing
  • Washer nozzle heater
  • Control unit adaptations

  • Read coding and change if necessary
  • Detach the transport protection of control module N15/5(electronic selector lever module control module), personalizer or activate the control module

  • Calibrate control unit 'A80(Intelligent servo module for DIRECT SELECT)
  • Teach-in of drive authorization system Variant coding reset

  • Control module adaptations Diagnosis routines

  • Learning of the throttle valve stop
  • Display of SCN Display of CVN
  • Display of model check number Correction programming of ignition
  • Correction programming of fuel quantity
  • Correction programming of specified idle speed in selector lever position 'P' or 'N' Correction programming of specified idle speed with gear range engaged
  • Injector injection quantity adjustment Activation of fuel pump
  • Teach in of throttle valve stop

  • Initial startup
  • Learn air conditioning Adaptations
  • Diagnosis routines
  • Read coding and/or transfer download to new control unit
  • Control unit adaptations

  • Control unit adaptations

  • Initial startup
  • Level calibration

  • Normalization
  • Separate normalization of steering column

  • Replace component Y74 (Pressure control valve)
  • Replace component B28/8 (Pressure differential sensor (DPF))
  • Reset quantity mean value adaptation data
  • Reset values for HFM drift compensation Resetting air filter learned values after
  • Air filter replacement
  • Adjustment On temperature of heater booster(Electric heater booster) Injector classification/Injector shutoff
  • Teaching in the diesel particulate filter after replacing the engine control unit activate fuel pump
  • Rapid teach-in of zero quantity calibration values

  • AssystSetting
  • General servicing
  • Internal Assyst plus data(Reading of main odometer)
  • Internal Assyst plus data(Days since initial registration)
  • Average mileage per day

  • Setting main odometer forward and back
  • Setting days since initial registration
  • Resetting menu settings to manufacturer default settings
  • ASSYST settings
  • Setting
  • Current Service data Oil change
  • Reset of maintenance interval display
  • Oil Change
  • Clock
  • Reset odometer to 0 km Oil change
  • Control unit adaptations
  • General servicing
  • Confirm overall maintenance

  • Control unit adaptations
  • Flashing stop lamp/Rear fog light
  • Read coding and change if necessary

  • Normalization of actuator motors
  • Teach-in of actuator motors
  • Teaching-in of rotary potentiometer for center nozzle and side outlets
  • Breaking-in of refrigerant compressor
  • Initial startup
  • Read coding and change if necessary
  • Check of adjustment range of positioning motors
  • Control unit reset
  • Perform normalizing of component M16/8(Blending air flap actuator motor)

  • Specified configuration of MOST components
  • Apply actual configuration of the MOST components as the specified configuration
  • Restart of optical ring

  • Variant coding
  • Read coding and change if necessary

  • Setting of limit position of excess force limiter
  • Read coding and change if necessary
  • Panoramic sliding roof
  • Setting of limit position of excess force limiter

Functions and Features

 

  • Channel 001:Electronic throttle (throttle self-adaptation)
  • Channel 002:Mass Air Flow Sensor(MAFS)detection
  • Channel 003:Exhaust Gas Recirculation(EGR)
  • Channel 008:Vacuum pump test(short distance)
  • Channel 011:Stamping control
  • Channel 028:ignition(Knock sensor test-short distance)
  • Channel 034:Oxygen sensor control(aging test: cylinder bank 1, sensor 1)
  • Channel 035:Oxygen sensor control(aging test: cylinder bank 2, sensor 1)
  • Channel 036:Oxygen sensor control(sensor ready-after catalyst converter)
  • Channel 037:Oxygen sensor control(oxygen sensor variance, cylinder bank 1)
  • Channel 038:Oxygen sensor control(oxygen sensor variance, cylinder bank 2)
  • Channel 039:Oxygen sensor control(sensor exchange)
  • Channel 043:Oxygen sensor control(aging test: cylinder bank 1, sensor 2)
  • Channel 044:Oxygen sensor control(aging test: cylinder bank 2,sensor 2)
  • Channel 046:Oxygen sensor control(catalyst conversion testing, cylinder bank 1)
  • Channel 047:Oxygen sensor control(catalyst conversion testing, cylinder bank 2)
  • Channel 048:Oxygen sensor control(Catalyst conver. thermal diagnose, cylin.bank1)
  • Channel 060:Electronic throttle (throttle self-adaptation)
  • Channel 063:Electronic throttle (forced downshift switch self-adaptation)
  • Channel 070:Emission lowered (EVAP valve testing)
  • Channel 071:Emission reduction (leakage diagnosis system)
  • Channel 074:Exhaust gas recirculation (EGR) valve misalignment
  • Channel 075:Emission reduction(Exhaust gas recirculation)
  • Channel 077:Emission reduction(secondary air injection, cylinder bank 1)
  • Channel 078:Emission reduction(secondary air injection, cylinder bank 2)
  • Channel 094:Inlet camshaft adjustment
  • Channel 096:Camshaft adjustment(exhaust)
  • Channel 098:Electronic throttle (throttle self-adaptation)
  • Channel 099:Oxygen sensor control cutoff
  • Channel 103:Fuel injection (fuel pump self-adaptation)
  • Channel 107:Fuel injection(fuel supply system)
  • Channel 130:Engine cooling (electronic cooling system)
  • Channel 140:Fuel supply system(fuel pressure lower)
  • Channel 142:Fuel supply system(self-adaptation of intake channel flap, cylin.bank 1)
  • Channel 145:test of exhaust gas temperature sensor
  • Channel 146:NOX storage catalyst, cylinder bank 1
  • Channel 148:Desulfuration NOX memory catalyst, cylinder bank 1
  • Channel 152:NOX sensor offset
  • Channel 190:Oxygen sensor control(aging test: cylinder bank 1,sensor 3)
  • Channel 191:Leakage diagnosis ,secondary air injection
  • Channel 200:Ready code(automatic "vehicle EOL" test
  • Channel 238:Fuel injection (fuel pump self-adaptation)
  • Channel 243:Fuel pump misalignment

  • Register/code-II information
  • Channel 001:Brake pump exhaust
  • Channel 001:Steering angle sensor (G85) misaligned
  • Channel 003:System function test activated
  • Channel 040:Longitudinal acceleration sensor off (G251)
  • Channel 042:Tire pressure monitoring system(TPMS)resetting
  • Channel 060:Steering angle sensor adjustment (G85)
  • Channel 061:Speed,lateral/longitudinal accelerate sensor adjustment(G200/G202/G251)
  • Channel 063:Lateral accelerate sensor adjustment(G200)
  • Channel 066:Brake pressure sensor adjustment(G201)
  • Channel 068:Speed sensor adjustment(G202)
  • Channel 069:Longitudinal accelerate sensor adjustment(G251)
  • Channel 093:ESP(electronic stability program)driving test initializatio

  • Channel 000:Throttle motor position self-adaptation
  • Channel 001:Throttle motor foundation setting

  • Channel 005:Turn on the rear parking brake to replace the gasket
  • Channel 006:Closed rear parking brake
  • Channel 007:Turn on rear parking brake to facilitate repair
  • Channel 010:Parking brake function test
  • Channel 020:Longitudinal acceleration sensor adjustment(G251)

  • Safety access information
  • Channel 001:Foundation setting of seat occupation identification control module(J706)

  • Channel 002:Malfunction indicator lamp(MIL)
  • Channel 003:Driver's steering reminding (DSR)
  • Channel 004:Parking steering assistance system

  • Safety access information
  • Channel 001:Tire pressure testing
  • Channel 004:Tire-pressure self-adaptation
  • Channel 005:Rated tire pressure under full load (front axle)
  • Channel 006:Rated tire pressure under part load(front axle)
  • Channel 007:Rated tire pressure under full load (rear axle)
  • Channel 008:Rated tire pressure under part load(rear axle)
  • Channel 017:Antenna diagnosis

  • Channel 001:Remote control self-adaptation
  • Channel 002:Unlocking twinkling
  • Channel 003:Locking twinkling
  • Channel 003:Automatic locking
  • Channel 004:Automatic unlocking
  • Channel 005:Internal monitoring
  • Channel 006:Unlocking loudspeaker
  • Channel 007:Locking loudspeaker
  • Channel 008:Unlocking twinkling
  • Channel 009:Locking twinkling
  • Channel 010:Country setting
  • Channel 021:Remote control self-adaptation (position of memory)

  • Channel 000:Forced downshift self-adaptation

  • Channel 000:Remote control deleted
  • Channel 001:Individualization-key 1
  • Channel 001:Remote control self-adaptation
  • Channel 002:Individualization-key 2
  • Channel 002:Automatic locking setting
  • Channel 003:Automatic unlocking setting
  • Channel 003:Individualization-key 3
  • Channel 003:Automatic locking
  • Channel 004:Automatic unlocking
  • Channel 004:Individualization-key 4
  • Channel 004:Enter the system unlocking reminding setting by keyless access
  • Channel 005:Internal monitoring

  • Channel 000:Reset self-learning values
  • Channel 001:Idle speed adjustment
  • Channel 002:Torque limit
  • Channel 003:Engine load calibration
  • Channel 004:Calibration of servo pump load
  • Channel 005:Exhaust gas recirculation(EGR)
  • Channel 006:Idle speed
  • Channel 007:Maximum speed limit
  • Channel 008:Coolant temperature calibration
  • Channel 009:Calibration of air-conditioner compressor torque
  • Channel 012:Soot mass calibration
  • Channel 050:Immobilizer (vehicle data self-adaptation)
  • Channel 091:Immobilizer status

  • Safety access information
  • Channel 056:Trailer stability
  • Channel 058:Down-hill assist control(HHA)

  • Channel 001:Control motor of air flow air valve (V71)
  • Channel 002:Control motor of recirculation gas air valve(V113)

  • Channel 001:Transmitter type
  • Channel 003:Self-adaptation starting assistance system

  • Safety access information
  • Channel 000:Seat occupation identification resetting
  • Channel 001:Front passenger's airbag off
  • Channel 002:Front driver's airbag off
  • Channel 003:Airbag off at front passenger's side
  • Channel 004:Airbag off at front driver's side
  • Channel 005:Front passenger's seatbelt tensioner off
  • Channel 006:Front driver's seatbelt tensioner off
  • Channel 007:Front passenger's head airbag off
  • Channel 008:Front driver's head airbag off
  • Channel 011:Rear driver's seatbelt tensioner off
  • Channel 012:Rear driver's seatbelt tensioner off
  • Channel 013:Passenger's seat occupation identification sensor off
  • Channel 014:Battery separation off
  • Channel 017:Front passenger's knee airbag off
  • Channel 017:Anti-rollover column off
  • Channel 018:Anti-rollover triggering counter resetting
  • Channel 018:Front driver knee airbag off
  • Channel 019:Rear central driver's safety belt tensioner off
  • Channel 020:Front airbag off switch invalid
  • Channel 021:Anti-rollover column off
  • Channel 021:Battery separation relay (J655) off
  • Channel 050:ESP(electronic stabilization program)-data power transmission system
  • Channel 051:ESP(electronic stabilization program)-data(braking)
  • Channel 081:Self-adaptation values (vehicle data)

  • Safety access information
  • Channel 001:Suspension calibration starting point, front left wheel data input
  • Channel 002:Front right wheel data input
  • Channel 003:Rear left wheel data input
  • Channel 004:Rear right wheel data input
  • Channel 005:Confirm measurement values to be saved by inputting new value 1
  • Channel 010:You can turn off or turn on the altitude control system

  • Channel 001:Immobilizer (key self-adaptation)
  • Channel 021:Immobilizer (key self-adaptation)
  • Channel 050:Immobilizer (vehicle data self-adaptation)

  • Channel 081:Self-adaptation values (vehicle data)

  • Channel 002:Maintenance reminding lamp
  • Channel 003:Fuel consumption display
  • Channel 004:Language
  • Channel 005:Maintenance reminding-maximum distance for engine oil replacement
  • Channel 006:Maintenance reminding-maximum distance
  • Channel 007:Maintenance reminding-maximum time
  • Channel 009:Distance (with 10km as unit)
  • Channel 010:Maintenance remind-distance for engine oil replacement
  • Channel 011:Maintenance remind-distance
  • Channel 012:Maintenance remind-time
  • Channel 016:Distance pulse identifier (only read)
  • Channel 017:Self-adaptation cruise control (ACC)
  • Channel 018:Extra heater
  • Channel 019:Radio control clock
  • Channel 021:Immobilizer-key self-adaptation
  • Channel 022:Production mode
  • Channel 025:Safety belt warning
  • Channel 027:Fuel tank features(fuel level sensor 4)
  • Channel 028:Fuel tank features(fuel level sensor 3)
  • Channel 029:Fuel tank features(fuel level sensor 2)
  • Channel 030:Fuel tank features(fuel level sensor 1)
  • Channel 031:Fuel tank features (humidity calibration)
  • Channel 032:Fuel tank features (failure to detect the fuel tank volume)
  • Channel 033:Fuel tank features (all calibration)
  • Channel 034:Fuel tank features (drying calibration)
  • Channel 035:Speed valve value
  • Channel 038:Minimum test of engine oil
  • Channel 039:Self-adaptation of engine oil level sensor
  • Channel 040:Mileage after maintenance
  • Channel 041:Time after maintenance
  • Channel 042:Minimum mileage until the next maintenance
  • Channel 043:Maximum mileage until the next maintenance
  • Channel 044:Maximum time until the next maintenance
  • Channel 045:engine oil quality
  • Channel 046:Total consumption (only limited to gas)
  • Channel 047:Soot input (only limited to diesel vehicle)
  • Channel 048:Heat load (only limited to diesel vehicle)
  • Channel 049:Minimum time until the next maintenance
  • Channel 050:Immobilizer-vehicle data self-adaptation
  • Channel 050:With fixed maintenance interval as standard, fundamental distance value until the next engine oil replacement
  • Channel 051:With fixed maintenance interval as standard, fundamental time value until the next engine oil replacement
  • Channel 060:Power transmission system CAN-data bus
  • Channel 061:Comfort mode CAN-data bus
  • Channel 062:Entertainment system CAN- data bus
  • Channel 099:Transport mode

Functions and Features

 

  • Channel 001:Electronic throttle (throttle self-adaptation)
  • Channel 002:Mass Air Flow Sensor(MAFS)detection
  • Channel 003:Exhaust Gas Recirculation(EGR)
  • Channel 008:Vacuum pump test(short distance)
  • Channel 011:Stamping control
  • Channel 028:ignition(Knock sensor test-short distance)
  • Channel 034:Oxygen sensor control(aging test: cylinder bank 1, sensor 1)
  • Channel 035:Oxygen sensor control(aging test: cylinder bank 2, sensor 1)
  • Channel 036:Oxygen sensor control(sensor ready-after catalyst converter)
  • Channel 037:Oxygen sensor control(oxygen sensor variance, cylinder bank 1)
  • Channel 038:Oxygen sensor control(oxygen sensor variance, cylinder bank 2)
  • Channel 039:Oxygen sensor control(sensor exchange)
  • Channel 043:Oxygen sensor control(aging test: cylinder bank 1, sensor 2)
  • Channel 044:Oxygen sensor control(aging test: cylinder bank 2,sensor 2)
  • Channel 046:Oxygen sensor control(catalyst conversion testing, cylinder bank 1)
  • Channel 047:Oxygen sensor control(catalyst conversion testing, cylinder bank 2)
  • Channel 048:Oxygen sensor control(Catalyst conver. thermal diagnose, cylin.bank1)
  • Channel 060:Electronic throttle (throttle self-adaptation)
  • Channel 063:Electronic throttle (forced downshift switch self-adaptation)
  • Channel 070:Emission lowered (EVAP valve testing)
  • Channel 071:Emission reduction (leakage diagnosis system)
  • Channel 074:Exhaust gas recirculation (EGR) valve misalignment
  • Channel 075:Emission reduction(Exhaust gas recirculation)
  • Channel 077:Emission reduction(secondary air injection, cylinder bank 1)
  • Channel 078:Emission reduction(secondary air injection, cylinder bank 2)
  • Channel 094:Inlet camshaft adjustment
  • Channel 096:Camshaft adjustment(exhaust)
  • Channel 098:Electronic throttle (throttle self-adaptation)
  • Channel 099:Oxygen sensor control cutoff
  • Channel 103:Fuel injection (fuel pump self-adaptation)
  • Channel 107:Fuel injection(fuel supply system)
  • Channel 130:Engine cooling (electronic cooling system)
  • Channel 140:Fuel supply system(fuel pressure lower)
  • Channel 142:Fuel supply system(self-adaptation of intake channel flap, cylin.bank 1)
  • Channel 145:test of exhaust gas temperature sensor
  • Channel 146:NOX storage catalyst, cylinder bank 1
  • Channel 148:Desulfuration NOX memory catalyst, cylinder bank 1
  • Channel 152:NOX sensor offset
  • Channel 190:Oxygen sensor control(aging test: cylinder bank 1,sensor 3)
  • Channel 191:Leakage diagnosis ,secondary air injection
  • Channel 200:Ready code(automatic "vehicle EOL" test
  • Channel 238:Fuel injection (fuel pump self-adaptation)
  • Channel 243:Fuel pump misalignment

  • Register/code-II information
  • Channel 001:Brake pump exhaust
  • Channel 001:Steering angle sensor (G85) misaligned
  • Channel 003:System function test activated
  • Channel 040:Longitudinal acceleration sensor off (G251)
  • Channel 042:Tire pressure monitoring system(TPMS)resetting
  • Channel 060:Steering angle sensor adjustment (G85)
  • Channel 061:Speed,lateral/longitudinal accelerate sensor adjustment(G200/G202/G251)
  • Channel 063:Lateral accelerate sensor adjustment(G200)
  • Channel 066:Brake pressure sensor adjustment(G201)
  • Channel 068:Speed sensor adjustment(G202)
  • Channel 069:Longitudinal accelerate sensor adjustment(G251)
  • Channel 093:ESP(electronic stability program)driving test initializatio

  • Channel 000:Throttle motor position self-adaptation
  • Channel 001:Throttle motor foundation setting

  • Channel 005:Turn on the rear parking brake to replace the gasket
  • Channel 006:Closed rear parking brake
  • Channel 007:Turn on rear parking brake to facilitate repair
  • Channel 010:Parking brake function test
  • Channel 020:Longitudinal acceleration sensor adjustment(G251)

  • Safety access information
  • Channel 001:Foundation setting of seat occupation identification control module(J706)

  • Channel 002:Malfunction indicator lamp(MIL)
  • Channel 003:Driver's steering reminding (DSR)
  • Channel 004:Parking steering assistance system

  • Safety access information
  • Channel 001:Tire pressure testing
  • Channel 004:Tire-pressure self-adaptation
  • Channel 005:Rated tire pressure under full load (front axle)
  • Channel 006:Rated tire pressure under part load(front axle)
  • Channel 007:Rated tire pressure under full load (rear axle)
  • Channel 008:Rated tire pressure under part load(rear axle)
  • Channel 017:Antenna diagnosis

  • Channel 001:Remote control self-adaptation
  • Channel 002:Unlocking twinkling
  • Channel 003:Locking twinkling
  • Channel 003:Automatic locking
  • Channel 004:Automatic unlocking
  • Channel 005:Internal monitoring
  • Channel 006:Unlocking loudspeaker
  • Channel 007:Locking loudspeaker
  • Channel 008:Unlocking twinkling
  • Channel 009:Locking twinkling
  • Channel 010:Country setting
  • Channel 021:Remote control self-adaptation (position of memory)

  • Channel 000:Forced downshift self-adaptation

  • Channel 000:Remote control deleted
  • Channel 001:Individualization-key 1
  • Channel 001:Remote control self-adaptation
  • Channel 002:Individualization-key 2
  • Channel 002:Automatic locking setting
  • Channel 003:Automatic unlocking setting
  • Channel 003:Individualization-key 3
  • Channel 003:Automatic locking
  • Channel 004:Automatic unlocking
  • Channel 004:Individualization-key 4
  • Channel 004:Enter the system unlocking reminding setting by keyless access
  • Channel 005:Internal monitoring

  • Channel 000:Reset self-learning values
  • Channel 001:Idle speed adjustment
  • Channel 002:Torque limit
  • Channel 003:Engine load calibration
  • Channel 004:Calibration of servo pump load
  • Channel 005:Exhaust gas recirculation(EGR)
  • Channel 006:Idle speed
  • Channel 007:Maximum speed limit
  • Channel 008:Coolant temperature calibration
  • Channel 009:Calibration of air-conditioner compressor torque
  • Channel 012:Soot mass calibration
  • Channel 050:Immobilizer (vehicle data self-adaptation)
  • Channel 091:Immobilizer status

  • Safety access information
  • Channel 056:Trailer stability
  • Channel 058:Down-hill assist control(HHA)

  • Channel 001:Control motor of air flow air valve (V71)
  • Channel 002:Control motor of recirculation gas air valve(V113)

  • Channel 001:Transmitter type
  • Channel 003:Self-adaptation starting assistance system

  • Safety access information
  • Channel 000:Seat occupation identification resetting
  • Channel 001:Front passenger's airbag off
  • Channel 002:Front driver's airbag off
  • Channel 003:Airbag off at front passenger's side
  • Channel 004:Airbag off at front driver's side
  • Channel 005:Front passenger's seatbelt tensioner off
  • Channel 006:Front driver's seatbelt tensioner off
  • Channel 007:Front passenger's head airbag off
  • Channel 008:Front driver's head airbag off
  • Channel 011:Rear driver's seatbelt tensioner off
  • Channel 012:Rear driver's seatbelt tensioner off
  • Channel 013:Passenger's seat occupation identification sensor off
  • Channel 014:Battery separation off
  • Channel 017:Front passenger's knee airbag off
  • Channel 017:Anti-rollover column off
  • Channel 018:Anti-rollover triggering counter resetting
  • Channel 018:Front driver knee airbag off
  • Channel 019:Rear central driver's safety belt tensioner off
  • Channel 020:Front airbag off switch invalid
  • Channel 021:Anti-rollover column off
  • Channel 021:Battery separation relay (J655) off
  • Channel 050:ESP(electronic stabilization program)-data power transmission system
  • Channel 051:ESP(electronic stabilization program)-data(braking)
  • Channel 081:Self-adaptation values (vehicle data)

  • Safety access information
  • Channel 001:Suspension calibration starting point, front left wheel data input
  • Channel 002:Front right wheel data input
  • Channel 003:Rear left wheel data input
  • Channel 004:Rear right wheel data input
  • Channel 005:Confirm measurement values to be saved by inputting new value 1
  • Channel 010:You can turn off or turn on the altitude control system

  • Channel 001:Immobilizer (key self-adaptation)
  • Channel 021:Immobilizer (key self-adaptation)
  • Channel 050:Immobilizer (vehicle data self-adaptation)

  • Channel 081:Self-adaptation values (vehicle data)

  • Channel 002:Maintenance reminding lamp
  • Channel 003:Fuel consumption display
  • Channel 004:Language
  • Channel 005:Maintenance reminding-maximum distance for engine oil replacement
  • Channel 006:Maintenance reminding-maximum distance
  • Channel 007:Maintenance reminding-maximum time
  • Channel 009:Distance (with 10km as unit)
  • Channel 010:Maintenance remind-distance for engine oil replacement
  • Channel 011:Maintenance remind-distance
  • Channel 012:Maintenance remind-time
  • Channel 016:Distance pulse identifier (only read)
  • Channel 017:Self-adaptation cruise control (ACC)
  • Channel 018:Extra heater
  • Channel 019:Radio control clock
  • Channel 021:Immobilizer-key self-adaptation
  • Channel 022:Production mode
  • Channel 025:Safety belt warning
  • Channel 027:Fuel tank features(fuel level sensor 4)
  • Channel 028:Fuel tank features(fuel level sensor 3)
  • Channel 029:Fuel tank features(fuel level sensor 2)
  • Channel 030:Fuel tank features(fuel level sensor 1)
  • Channel 031:Fuel tank features (humidity calibration)
  • Channel 032:Fuel tank features (failure to detect the fuel tank volume)
  • Channel 033:Fuel tank features (all calibration)
  • Channel 034:Fuel tank features (drying calibration)
  • Channel 035:Speed valve value
  • Channel 038:Minimum test of engine oil
  • Channel 039:Self-adaptation of engine oil level sensor
  • Channel 040:Mileage after maintenance
  • Channel 041:Time after maintenance
  • Channel 042:Minimum mileage until the next maintenance
  • Channel 043:Maximum mileage until the next maintenance
  • Channel 044:Maximum time until the next maintenance
  • Channel 045:engine oil quality
  • Channel 046:Total consumption (only limited to gas)
  • Channel 047:Soot input (only limited to diesel vehicle)
  • Channel 048:Heat load (only limited to diesel vehicle)
  • Channel 049:Minimum time until the next maintenance
  • Channel 050:Immobilizer-vehicle data self-adaptation
  • Channel 050:With fixed maintenance interval as standard, fundamental distance value until the next engine oil replacement
  • Channel 051:With fixed maintenance interval as standard, fundamental time value until the next engine oil replacement
  • Channel 060:Power transmission system CAN-data bus
  • Channel 061:Comfort mode CAN-data bus
  • Channel 062:Entertainment system CAN- data bus
  • Channel 099:Transport mode

Functions and Features

 

  • Channel 001:Electronic throttle (throttle self-adaptation)
  • Channel 002:Mass Air Flow Sensor(MAFS)detection
  • Channel 003:Exhaust Gas Recirculation(EGR)
  • Channel 008:Vacuum pump test(short distance)
  • Channel 011:Stamping control
  • Channel 028:ignition(Knock sensor test-short distance)
  • Channel 034:Oxygen sensor control(aging test: cylinder bank 1, sensor 1)
  • Channel 035:Oxygen sensor control(aging test: cylinder bank 2, sensor 1)
  • Channel 036:Oxygen sensor control(sensor ready-after catalyst converter)
  • Channel 037:Oxygen sensor control(oxygen sensor variance, cylinder bank 1)
  • Channel 038:Oxygen sensor control(oxygen sensor variance, cylinder bank 2)
  • Channel 039:Oxygen sensor control(sensor exchange)
  • Channel 043:Oxygen sensor control(aging test: cylinder bank 1, sensor 2)
  • Channel 044:Oxygen sensor control(aging test: cylinder bank 2,sensor 2)
  • Channel 046:Oxygen sensor control(catalyst conversion testing, cylinder bank 1)
  • Channel 047:Oxygen sensor control(catalyst conversion testing, cylinder bank 2)
  • Channel 048:Oxygen sensor control(Catalyst conver. thermal diagnose, cylin.bank1)
  • Channel 060:Electronic throttle (throttle self-adaptation)
  • Channel 063:Electronic throttle (forced downshift switch self-adaptation)
  • Channel 070:Emission lowered (EVAP valve testing)
  • Channel 071:Emission reduction (leakage diagnosis system)
  • Channel 074:Exhaust gas recirculation (EGR) valve misalignment
  • Channel 075:Emission reduction(Exhaust gas recirculation)
  • Channel 077:Emission reduction(secondary air injection, cylinder bank 1)
  • Channel 078:Emission reduction(secondary air injection, cylinder bank 2)
  • Channel 094:Inlet camshaft adjustment
  • Channel 096:Camshaft adjustment(exhaust)
  • Channel 098:Electronic throttle (throttle self-adaptation)
  • Channel 099:Oxygen sensor control cutoff
  • Channel 103:Fuel injection (fuel pump self-adaptation)
  • Channel 107:Fuel injection(fuel supply system)
  • Channel 130:Engine cooling (electronic cooling system)
  • Channel 140:Fuel supply system(fuel pressure lower)
  • Channel 142:Fuel supply system(self-adaptation of intake channel flap, cylin.bank 1)
  • Channel 145:test of exhaust gas temperature sensor
  • Channel 146:NOX storage catalyst, cylinder bank 1
  • Channel 148:Desulfuration NOX memory catalyst, cylinder bank 1
  • Channel 152:NOX sensor offset
  • Channel 190:Oxygen sensor control(aging test: cylinder bank 1,sensor 3)
  • Channel 191:Leakage diagnosis ,secondary air injection
  • Channel 200:Ready code(automatic "vehicle EOL" test
  • Channel 238:Fuel injection (fuel pump self-adaptation)
  • Channel 243:Fuel pump misalignment

  • Register/code-II information
  • Channel 001:Brake pump exhaust
  • Channel 001:Steering angle sensor (G85) misaligned
  • Channel 003:System function test activated
  • Channel 040:Longitudinal acceleration sensor off (G251)
  • Channel 042:Tire pressure monitoring system(TPMS)resetting
  • Channel 060:Steering angle sensor adjustment (G85)
  • Channel 061:Speed,lateral/longitudinal accelerate sensor adjustment(G200/G202/G251)
  • Channel 063:Lateral accelerate sensor adjustment(G200)
  • Channel 066:Brake pressure sensor adjustment(G201)
  • Channel 068:Speed sensor adjustment(G202)
  • Channel 069:Longitudinal accelerate sensor adjustment(G251)
  • Channel 093:ESP(electronic stability program)driving test initializatio

  • Channel 000:Throttle motor position self-adaptation
  • Channel 001:Throttle motor foundation setting

  • Channel 005:Turn on the rear parking brake to replace the gasket
  • Channel 006:Closed rear parking brake
  • Channel 007:Turn on rear parking brake to facilitate repair
  • Channel 010:Parking brake function test
  • Channel 020:Longitudinal acceleration sensor adjustment(G251)

  • Safety access information
  • Channel 001:Foundation setting of seat occupation identification control module(J706)

  • Channel 002:Malfunction indicator lamp(MIL)
  • Channel 003:Driver's steering reminding (DSR)
  • Channel 004:Parking steering assistance system

  • Safety access information
  • Channel 001:Tire pressure testing
  • Channel 004:Tire-pressure self-adaptation
  • Channel 005:Rated tire pressure under full load (front axle)
  • Channel 006:Rated tire pressure under part load(front axle)
  • Channel 007:Rated tire pressure under full load (rear axle)
  • Channel 008:Rated tire pressure under part load(rear axle)
  • Channel 017:Antenna diagnosis

  • Channel 001:Remote control self-adaptation
  • Channel 002:Unlocking twinkling
  • Channel 003:Locking twinkling
  • Channel 003:Automatic locking
  • Channel 004:Automatic unlocking
  • Channel 005:Internal monitoring
  • Channel 006:Unlocking loudspeaker
  • Channel 007:Locking loudspeaker
  • Channel 008:Unlocking twinkling
  • Channel 009:Locking twinkling
  • Channel 010:Country setting
  • Channel 021:Remote control self-adaptation (position of memory)

  • Channel 000:Forced downshift self-adaptation

  • Channel 000:Remote control deleted
  • Channel 001:Individualization-key 1
  • Channel 001:Remote control self-adaptation
  • Channel 002:Individualization-key 2
  • Channel 002:Automatic locking setting
  • Channel 003:Automatic unlocking setting
  • Channel 003:Individualization-key 3
  • Channel 003:Automatic locking
  • Channel 004:Automatic unlocking
  • Channel 004:Individualization-key 4
  • Channel 004:Enter the system unlocking reminding setting by keyless access
  • Channel 005:Internal monitoring

  • Channel 000:Reset self-learning values
  • Channel 001:Idle speed adjustment
  • Channel 002:Torque limit
  • Channel 003:Engine load calibration
  • Channel 004:Calibration of servo pump load
  • Channel 005:Exhaust gas recirculation(EGR)
  • Channel 006:Idle speed
  • Channel 007:Maximum speed limit
  • Channel 008:Coolant temperature calibration
  • Channel 009:Calibration of air-conditioner compressor torque
  • Channel 012:Soot mass calibration
  • Channel 050:Immobilizer (vehicle data self-adaptation)
  • Channel 091:Immobilizer status

  • Safety access information
  • Channel 056:Trailer stability
  • Channel 058:Down-hill assist control(HHA)

  • Channel 001:Control motor of air flow air valve (V71)
  • Channel 002:Control motor of recirculation gas air valve(V113)

  • Channel 001:Transmitter type
  • Channel 003:Self-adaptation starting assistance system

  • Safety access information
  • Channel 000:Seat occupation identification resetting
  • Channel 001:Front passenger's airbag off
  • Channel 002:Front driver's airbag off
  • Channel 003:Airbag off at front passenger's side
  • Channel 004:Airbag off at front driver's side
  • Channel 005:Front passenger's seatbelt tensioner off
  • Channel 006:Front driver's seatbelt tensioner off
  • Channel 007:Front passenger's head airbag off
  • Channel 008:Front driver's head airbag off
  • Channel 011:Rear driver's seatbelt tensioner off
  • Channel 012:Rear driver's seatbelt tensioner off
  • Channel 013:Passenger's seat occupation identification sensor off
  • Channel 014:Battery separation off
  • Channel 017:Front passenger's knee airbag off
  • Channel 017:Anti-rollover column off
  • Channel 018:Anti-rollover triggering counter resetting
  • Channel 018:Front driver knee airbag off
  • Channel 019:Rear central driver's safety belt tensioner off
  • Channel 020:Front airbag off switch invalid
  • Channel 021:Anti-rollover column off
  • Channel 021:Battery separation relay (J655) off
  • Channel 050:ESP(electronic stabilization program)-data power transmission system
  • Channel 051:ESP(electronic stabilization program)-data(braking)
  • Channel 081:Self-adaptation values (vehicle data)

  • Safety access information
  • Channel 001:Suspension calibration starting point, front left wheel data input
  • Channel 002:Front right wheel data input
  • Channel 003:Rear left wheel data input
  • Channel 004:Rear right wheel data input
  • Channel 005:Confirm measurement values to be saved by inputting new value 1
  • Channel 010:You can turn off or turn on the altitude control system

  • Channel 001:Immobilizer (key self-adaptation)
  • Channel 021:Immobilizer (key self-adaptation)
  • Channel 050:Immobilizer (vehicle data self-adaptation)

  • Channel 081:Self-adaptation values (vehicle data)

  • Channel 002:Maintenance reminding lamp
  • Channel 003:Fuel consumption display
  • Channel 004:Language
  • Channel 005:Maintenance reminding-maximum distance for engine oil replacement
  • Channel 006:Maintenance reminding-maximum distance
  • Channel 007:Maintenance reminding-maximum time
  • Channel 009:Distance (with 10km as unit)
  • Channel 010:Maintenance remind-distance for engine oil replacement
  • Channel 011:Maintenance remind-distance
  • Channel 012:Maintenance remind-time
  • Channel 016:Distance pulse identifier (only read)
  • Channel 017:Self-adaptation cruise control (ACC)
  • Channel 018:Extra heater
  • Channel 019:Radio control clock
  • Channel 021:Immobilizer-key self-adaptation
  • Channel 022:Production mode
  • Channel 025:Safety belt warning
  • Channel 027:Fuel tank features(fuel level sensor 4)
  • Channel 028:Fuel tank features(fuel level sensor 3)
  • Channel 029:Fuel tank features(fuel level sensor 2)
  • Channel 030:Fuel tank features(fuel level sensor 1)
  • Channel 031:Fuel tank features (humidity calibration)
  • Channel 032:Fuel tank features (failure to detect the fuel tank volume)
  • Channel 033:Fuel tank features (all calibration)
  • Channel 034:Fuel tank features (drying calibration)
  • Channel 035:Speed valve value
  • Channel 038:Minimum test of engine oil
  • Channel 039:Self-adaptation of engine oil level sensor
  • Channel 040:Mileage after maintenance
  • Channel 041:Time after maintenance
  • Channel 042:Minimum mileage until the next maintenance
  • Channel 043:Maximum mileage until the next maintenance
  • Channel 044:Maximum time until the next maintenance
  • Channel 045:engine oil quality
  • Channel 046:Total consumption (only limited to gas)
  • Channel 047:Soot input (only limited to diesel vehicle)
  • Channel 048:Heat load (only limited to diesel vehicle)
  • Channel 049:Minimum time until the next maintenance
  • Channel 050:Immobilizer-vehicle data self-adaptation
  • Channel 050:With fixed maintenance interval as standard, fundamental distance value until the next engine oil replacement
  • Channel 051:With fixed maintenance interval as standard, fundamental time value until the next engine oil replacement
  • Channel 060:Power transmission system CAN-data bus
  • Channel 061:Comfort mode CAN-data bus
  • Channel 062:Entertainment system CAN- data bus
  • Channel 099:Transport mode

Functions and Features

 

  • Channel 001:Electronic throttle (throttle self-adaptation)
  • Channel 002:Mass Air Flow Sensor(MAFS)detection
  • Channel 003:Exhaust Gas Recirculation(EGR)
  • Channel 008:Vacuum pump test(short distance)
  • Channel 011:Stamping control
  • Channel 028:ignition(Knock sensor test-short distance)
  • Channel 034:Oxygen sensor control(aging test: cylinder bank 1, sensor 1)
  • Channel 035:Oxygen sensor control(aging test: cylinder bank 2, sensor 1)
  • Channel 036:Oxygen sensor control(sensor ready-after catalyst converter)
  • Channel 037:Oxygen sensor control(oxygen sensor variance, cylinder bank 1)
  • Channel 038:Oxygen sensor control(oxygen sensor variance, cylinder bank 2)
  • Channel 039:Oxygen sensor control(sensor exchange)
  • Channel 043:Oxygen sensor control(aging test: cylinder bank 1, sensor 2)
  • Channel 044:Oxygen sensor control(aging test: cylinder bank 2,sensor 2)
  • Channel 046:Oxygen sensor control(catalyst conversion testing, cylinder bank 1)
  • Channel 047:Oxygen sensor control(catalyst conversion testing, cylinder bank 2)
  • Channel 048:Oxygen sensor control(Catalyst conver. thermal diagnose, cylin.bank1)
  • Channel 060:Electronic throttle (throttle self-adaptation)
  • Channel 063:Electronic throttle (forced downshift switch self-adaptation)
  • Channel 070:Emission lowered (EVAP valve testing)
  • Channel 071:Emission reduction (leakage diagnosis system)
  • Channel 074:Exhaust gas recirculation (EGR) valve misalignment
  • Channel 075:Emission reduction(Exhaust gas recirculation)
  • Channel 077:Emission reduction(secondary air injection, cylinder bank 1)
  • Channel 078:Emission reduction(secondary air injection, cylinder bank 2)
  • Channel 094:Inlet camshaft adjustment
  • Channel 096:Camshaft adjustment(exhaust)
  • Channel 098:Electronic throttle (throttle self-adaptation)
  • Channel 099:Oxygen sensor control cutoff
  • Channel 103:Fuel injection (fuel pump self-adaptation)
  • Channel 107:Fuel injection(fuel supply system)
  • Channel 130:Engine cooling (electronic cooling system)
  • Channel 140:Fuel supply system(fuel pressure lower)
  • Channel 142:Fuel supply system(self-adaptation of intake channel flap, cylin.bank 1)
  • Channel 145:test of exhaust gas temperature sensor
  • Channel 146:NOX storage catalyst, cylinder bank 1
  • Channel 148:Desulfuration NOX memory catalyst, cylinder bank 1
  • Channel 152:NOX sensor offset
  • Channel 190:Oxygen sensor control(aging test: cylinder bank 1,sensor 3)
  • Channel 191:Leakage diagnosis ,secondary air injection
  • Channel 200:Ready code(automatic "vehicle EOL" test
  • Channel 238:Fuel injection (fuel pump self-adaptation)
  • Channel 243:Fuel pump misalignment

  • Register/code-II information
  • Channel 001:Brake pump exhaust
  • Channel 001:Steering angle sensor (G85) misaligned
  • Channel 003:System function test activated
  • Channel 040:Longitudinal acceleration sensor off (G251)
  • Channel 042:Tire pressure monitoring system(TPMS)resetting
  • Channel 060:Steering angle sensor adjustment (G85)
  • Channel 061:Speed,lateral/longitudinal accelerate sensor adjustment(G200/G202/G251)
  • Channel 063:Lateral accelerate sensor adjustment(G200)
  • Channel 066:Brake pressure sensor adjustment(G201)
  • Channel 068:Speed sensor adjustment(G202)
  • Channel 069:Longitudinal accelerate sensor adjustment(G251)
  • Channel 093:ESP(electronic stability program)driving test initializatio

  • Channel 000:Throttle motor position self-adaptation
  • Channel 001:Throttle motor foundation setting

  • Channel 005:Turn on the rear parking brake to replace the gasket
  • Channel 006:Closed rear parking brake
  • Channel 007:Turn on rear parking brake to facilitate repair
  • Channel 010:Parking brake function test
  • Channel 020:Longitudinal acceleration sensor adjustment(G251)

  • Safety access information
  • Channel 001:Foundation setting of seat occupation identification control module(J706)

  • Channel 002:Malfunction indicator lamp(MIL)
  • Channel 003:Driver's steering reminding (DSR)
  • Channel 004:Parking steering assistance system

  • Safety access information
  • Channel 001:Tire pressure testing
  • Channel 004:Tire-pressure self-adaptation
  • Channel 005:Rated tire pressure under full load (front axle)
  • Channel 006:Rated tire pressure under part load(front axle)
  • Channel 007:Rated tire pressure under full load (rear axle)
  • Channel 008:Rated tire pressure under part load(rear axle)
  • Channel 017:Antenna diagnosis

  • Channel 001:Remote control self-adaptation
  • Channel 002:Unlocking twinkling
  • Channel 003:Locking twinkling
  • Channel 003:Automatic locking
  • Channel 004:Automatic unlocking
  • Channel 005:Internal monitoring
  • Channel 006:Unlocking loudspeaker
  • Channel 007:Locking loudspeaker
  • Channel 008:Unlocking twinkling
  • Channel 009:Locking twinkling
  • Channel 010:Country setting
  • Channel 021:Remote control self-adaptation (position of memory)

  • Channel 000:Forced downshift self-adaptation

  • Channel 000:Remote control deleted
  • Channel 001:Individualization-key 1
  • Channel 001:Remote control self-adaptation
  • Channel 002:Individualization-key 2
  • Channel 002:Automatic locking setting
  • Channel 003:Automatic unlocking setting
  • Channel 003:Individualization-key 3
  • Channel 003:Automatic locking
  • Channel 004:Automatic unlocking
  • Channel 004:Individualization-key 4
  • Channel 004:Enter the system unlocking reminding setting by keyless access
  • Channel 005:Internal monitoring

  • Channel 000:Reset self-learning values
  • Channel 001:Idle speed adjustment
  • Channel 002:Torque limit
  • Channel 003:Engine load calibration
  • Channel 004:Calibration of servo pump load
  • Channel 005:Exhaust gas recirculation(EGR)
  • Channel 006:Idle speed
  • Channel 007:Maximum speed limit
  • Channel 008:Coolant temperature calibration
  • Channel 009:Calibration of air-conditioner compressor torque
  • Channel 012:Soot mass calibration
  • Channel 050:Immobilizer (vehicle data self-adaptation)
  • Channel 091:Immobilizer status

  • Safety access information
  • Channel 056:Trailer stability
  • Channel 058:Down-hill assist control(HHA)

  • Channel 001:Control motor of air flow air valve (V71)
  • Channel 002:Control motor of recirculation gas air valve(V113)

  • Channel 001:Transmitter type
  • Channel 003:Self-adaptation starting assistance system

  • Safety access information
  • Channel 000:Seat occupation identification resetting
  • Channel 001:Front passenger's airbag off
  • Channel 002:Front driver's airbag off
  • Channel 003:Airbag off at front passenger's side
  • Channel 004:Airbag off at front driver's side
  • Channel 005:Front passenger's seatbelt tensioner off
  • Channel 006:Front driver's seatbelt tensioner off
  • Channel 007:Front passenger's head airbag off
  • Channel 008:Front driver's head airbag off
  • Channel 011:Rear driver's seatbelt tensioner off
  • Channel 012:Rear driver's seatbelt tensioner off
  • Channel 013:Passenger's seat occupation identification sensor off
  • Channel 014:Battery separation off
  • Channel 017:Front passenger's knee airbag off
  • Channel 017:Anti-rollover column off
  • Channel 018:Anti-rollover triggering counter resetting
  • Channel 018:Front driver knee airbag off
  • Channel 019:Rear central driver's safety belt tensioner off
  • Channel 020:Front airbag off switch invalid
  • Channel 021:Anti-rollover column off
  • Channel 021:Battery separation relay (J655) off
  • Channel 050:ESP(electronic stabilization program)-data power transmission system
  • Channel 051:ESP(electronic stabilization program)-data(braking)
  • Channel 081:Self-adaptation values (vehicle data)

  • Safety access information
  • Channel 001:Suspension calibration starting point, front left wheel data input
  • Channel 002:Front right wheel data input
  • Channel 003:Rear left wheel data input
  • Channel 004:Rear right wheel data input
  • Channel 005:Confirm measurement values to be saved by inputting new value 1
  • Channel 010:You can turn off or turn on the altitude control system

  • Channel 001:Immobilizer (key self-adaptation)
  • Channel 021:Immobilizer (key self-adaptation)
  • Channel 050:Immobilizer (vehicle data self-adaptation)

  • Channel 081:Self-adaptation values (vehicle data)

  • Channel 002:Maintenance reminding lamp
  • Channel 003:Fuel consumption display
  • Channel 004:Language
  • Channel 005:Maintenance reminding-maximum distance for engine oil replacement
  • Channel 006:Maintenance reminding-maximum distance
  • Channel 007:Maintenance reminding-maximum time
  • Channel 009:Distance (with 10km as unit)
  • Channel 010:Maintenance remind-distance for engine oil replacement
  • Channel 011:Maintenance remind-distance
  • Channel 012:Maintenance remind-time
  • Channel 016:Distance pulse identifier (only read)
  • Channel 017:Self-adaptation cruise control (ACC)
  • Channel 018:Extra heater
  • Channel 019:Radio control clock
  • Channel 021:Immobilizer-key self-adaptation
  • Channel 022:Production mode
  • Channel 025:Safety belt warning
  • Channel 027:Fuel tank features(fuel level sensor 4)
  • Channel 028:Fuel tank features(fuel level sensor 3)
  • Channel 029:Fuel tank features(fuel level sensor 2)
  • Channel 030:Fuel tank features(fuel level sensor 1)
  • Channel 031:Fuel tank features (humidity calibration)
  • Channel 032:Fuel tank features (failure to detect the fuel tank volume)
  • Channel 033:Fuel tank features (all calibration)
  • Channel 034:Fuel tank features (drying calibration)
  • Channel 035:Speed valve value
  • Channel 038:Minimum test of engine oil
  • Channel 039:Self-adaptation of engine oil level sensor
  • Channel 040:Mileage after maintenance
  • Channel 041:Time after maintenance
  • Channel 042:Minimum mileage until the next maintenance
  • Channel 043:Maximum mileage until the next maintenance
  • Channel 044:Maximum time until the next maintenance
  • Channel 045:engine oil quality
  • Channel 046:Total consumption (only limited to gas)
  • Channel 047:Soot input (only limited to diesel vehicle)
  • Channel 048:Heat load (only limited to diesel vehicle)
  • Channel 049:Minimum time until the next maintenance
  • Channel 050:Immobilizer-vehicle data self-adaptation
  • Channel 050:With fixed maintenance interval as standard, fundamental distance value until the next engine oil replacement
  • Channel 051:With fixed maintenance interval as standard, fundamental time value until the next engine oil replacement
  • Channel 060:Power transmission system CAN-data bus
  • Channel 061:Comfort mode CAN-data bus
  • Channel 062:Entertainment system CAN- data bus
  • Channel 099:Transport mode

Functions and Features

 

  • Alignment EWS-DME

  • Clear adaptations

  • Clear adaptations

  • Reset service interval indicator

  • DSC Sensor Calibration

  • Steering angle sensor adjustment

  • Disable/enable key

  • CBS correction, vehicle data

  • Engine oil
  • Front brake
  • Rear brake
  • Brake fluid
  • Vehicle check
  • Vehicle inspection
  • Exhaust emission inspection
  • Vehicle check-linked

Functions and Features

 

  • Bleeding
  • Configuration for ABS
  • Calibration of the gyrometer accelerometer sensor
  • De-calibration of the steering wheel angle sensor
  • Steering wheel angle sensor calibration
  • Restyled Configuration
  • Not restyled Configuration
  • Restrictor Calibration of the gyrometer accelerometer sensor
  • Restrictor Calibration of the steering wheel angle sensor

  • Initializing the auto adaptive

  • Forcing of the customer mode
  • Resetting to zero of the service mileage
  • Programming of the build-in systems interface (Engine Immobilizer code and keys )
  • Configuration
  • Forcing of the fuel gauging data
  • BSI Key Learning
  • BSI Check of the coded engine

  • Replacement of the particle emission filter
  • Replacement of the additive reservoir of the pump or of the pipes
  • Particle filter regeneration(stationary)
  • Particle filter regeneration(moving)
  • Initialization turbo limit
  • Particle filter replacement
  • Initialize. FAP filter additive quantity
  • Replace or fill additive tank
  • Replace metering pump
  • Tank filling
  • EGR throttle learning

  • Configuration
  • Maintenance

  • Service Reset

  • Locking
  • Unlocking
  • Configuration

  • Calibration

  • EGR throttle learning
  • Initialization turbo limit
  • Particle filter replacement
  • Particle filter regeneration
  • Initialize. FAP filter additive quantity
  • Replace or fill additive tank
  • Replace metering pump
  • Tank filling
  • Initializing the auto adaptive

  • Setting of the clutch actuator to the fitting/ removal position
  • Programming of the clutch and gearbox actuators in progress

  • Initializing the auto-adaptive

  • Steering wheel angle calibration

Functions and Features

 

  • Clear deployment record

  • Erase Remote Keys
  • Program Remote Key
  • Brake Pedal Position Sensor Learn
  • Clear Driver Window Learn Values
  • Clear Left Rear Window Learn Values
  • Clear Passenger Window Learn Values
  • Clear Right Rear Window Learn Values
  • ECU Control

  • Reset ECU

  • Calibration

  • Erase Key Set
  • Program Transponder-Keys

  • Erase Transponder-Keys And Remote
  • Program Transponder-Keys And Remote

  • Fuel Trim Reset

  • Gear Selector N Position Learn
  • Learned Values Reset

  • Control unit adaptations

  • Brake Pressure Sensor Calibration
  • Yaw Rate Sensor Learn
  • Steering Wheel Angle Sensor Learns

  • Power Steering Softstops Reset
  • Power Steering Softstops Learn

  • HVAC Actuators Learn
  • CAN Bus Configuration Learn

  • Erase Key Set
  • Program Transponder-Keys

  • APP Learn
  • Adjust Idle Speed
  • Catalyst Reset
  • Clutch Pedal Position Learn
  • Crankshaft Position Reluctor Wheel Learn
  • Crankshaft Position Variation Learn
  • DPF Pressure Sensor Learn
  • DPF Reset
  • EGR Valve Learn
  • Exhaust Gas Temperature Sensor Learn
  • Engine Oil Life Reset
  • ECU Control
  • ECU Control-Electronic throttle control
  • Fuel Trim Reset
  • Flywheel Learn
  • Fuel Rail Pressure Sensor or Fuel Rail Learn
  • Glow Plug Control Module Reset
  • HO2S Heater Learn
  • Idle Learn
  • Inject Cutoff Test
  • Idle speed program
  • MAF Sensor Learn
  • Programming
  • Program Injector
  • Program Idle Speed
  • Program High Can Bus Configuration
  • RPM Control
  • Reset O2-Loop Block Learn Map
  • Reset Learned Values
  • Reset Engine Oil Life
  • Replace Rail Pressure Sensor
  • Replace Diff.-Press. Sensor
  • Replace Precatalyst
  • Replace MAF Sensor
  • Reset ECU
  • Replace O2 Sensor
  • Replace Injector
  • Replace Mass air flow sensor
  • Replace Diesel Particulate Filter
  • Regeneration DPF

  • Steering Angle Sensor Calibration

  • Steering Angle Sensor Calibration

  • Service Light Reset
  • Service Due In
  • CAN Bus Configuration Learn

Functions and Features

  • Read fault codes
  • Clean fault codes
  • Read real-time parameters
  • Component activation test
  • Component adaptations
  • Fault codes shown with available information
  • Read vehicle information (VIN, ECU)
  • ECU Coding
  • ECU Programming
  • Diesel engine, Gasoline engine, ABS, EDL, ASR, ESP, AIR-BAG, immobilizer
  • Instrument cluster, door electronics, steering column, and battery control
  • Vehicle electrical control unit - BCM, trailer function AHF, Radio-navigation
  • Special Functions List
  • ABS+TRACT. CONTROL
  • Engine management
  • Parking help
  • Airbag
  • Key encode
  • Visual/Telematics
 

  • Longitudinal accel sensor calibration
  • Steering angle calibration

  • Rail pressure sensor
  • Differential pressure sensor replacement
  • Precat. Replace - only with FAP filter
  • Self-learnt functions zeroing
  • Oil replacement - only with FAP filter
  • Cyl.1 injector code entry
  • Cyl.2 injector code entry
  • Cyl.3 injector code entry
  • Cyl.4 injector code entry
  • Cyl.5 injector code entry

  • Tow hook presence - Disable
  • Tow hook presence - Enable

  • ECU ID Data

  • Key programming

  • Roof lamp learning zeroing

Functions and Features

  • Read fault codes
  • Clean fault codes
  • Read real-time parameters
  • Component activation test
  • Component adaptations
  • Fault codes shown with available information
  • Read vehicle information (VIN, ECU)
  • Diesel engine, Gasoline engine, ABS, EDL, ASR, ESP, AIR-BAG, immobilizer
  • Instrument cluster, door electronics, steering column, and battery control
  • Vehicle electrical control unit - BCM, trailer function AHF, Radio-navigation
  • Special Functions List
  • Service reset
 

Functions and Features

 

  • Reading off the configuration

  • Calibrating the position sensor for Bi-Xenon lamps

  • Calibration(Cars with DSTC)
  • Check brake light switch adjustment
  • Reading off the configuration

  • Activation

  • Read out of the number of programmed remote keys
  • Read-out of part number and serial number, Remote

  • Quick-test injectors
  • Quick test of exhaust camshaft control
  • Quick test of intake camshaft control
  • Quick test of fuel pump(FP)
  • Quick test of the fuel tank system(USA/CDN)
  • Readiness Code (USA/CDN)
  • Reading off IUMPR (USA/CDN)
  • Resetting the adaptation values
  • Resetting the odometer particle trap
  • Resetting counter particle filter
  • Adaptation of the throttle unit
  • Adaptation of the exhaust gas recirculation (EGR) valve
  • Programming optimizing parameters
  • Combustion of soot particle, particle trap
  • Checking injectors
  • Checking the oil level

  • Ignition switch key position
  • Resetting crash mode
  • Resetting low voltage counters
  • Programming of rear window wiper when reversing
  • Calibration of position sensor, GDL lamps
  • Quick test of alternator function
  • Resetting factory settings
  • Programming the control module
  • Reading off the alarm cause
  • Resetting the car

  • Programming of Parking Assistance Module(PAM)

  • Calibration of position sensor

  • Calibration of position sensor
  • Resetting counter oi
  • Resetting adaptation to zero
  • Resetting the counter for - Gearbox oil change
  • Initial adaptation

  • Resetting the service reminder indicator
  • Testing all needles and lamps in the dashboard
  • Programming the driver information module(DIM)
  • Resetting the service reminder indicator(SRI)
  • Indicates programmed values
  • Reading off programmed values
  • Display of DSTC message
  • Programming seatbelt reminder in backseat
  • Programming the gear shift indicator
  • Testing all indicators and lamps in the driver information module(DIM)
  • Programming the audible acknowledgement signal, seat belt reminder

  • Programming the infotainment control module(ICM)
  • Checking MOST communication
  • Programming control module

  • Calibrating the occupant weight sensor(OWS)
  • Storing the ID number for the occupant weight sensor(OWS)

  • Refilling the feed hose with additive
  • Resetting the tank level gauge

  • Activating and reading off sun roof parameters
  • Programming the control module
  • Configuration of the siren
  • Replacing the control module
  • Reading the programmed values

  • Programming the remote control setting
  • Checking current values

  • Reinstalling the reserve battery
  • Volvo On call service check
  • Reinstalling the spare battery
  • Resetting the car phone code

  • Reinstalling the reserve battery

  • Initializing the window position
  • Programming the remote control setting

  • Identifying the Damper Motor Module(DMM)
  • Adjusting ECC parameters
  • Reading off programmed values
  • Calibrating the Climate Control Module (CCM)

  • Activation and service

  • Initializing the window position
  • Checking the window in the rear door

  • Resetting counter oil
  • Adaptation of throttle module
  • Combustion Of Soot Particles
  • Resetting Counter Particle Filtery

Functions and Features

 

  • Steering Angle Sensor Initialization
  • Speedo Index
  • Vehicle Parameters
  • Prevention Of Stop Light Auto Illumination
  • Auto Stop Lights Illumination Authorization
  • ESP Automatic Reconnection Threshold
  • Write Date Of Last After Sales Operation
  • Vehicle Speed At Initialization
  • Last Intervention Date Setting

  • A/T lever block SV (shift lock)
  • Actuators Control
  • Note Oil Wear Counter
  • Write Transmission Oil Change Date
  • Write Date Of Last After Sales Operation

  • Configuration
  • Cyl. 1 injector code entry/reading
  • Cyl. 2 injector code entry/reading
  • Cyl. 3 injector code entry/reading
  • Cyl. 4 injector code entry/reading
  • Accessories disconn.: Active
  • Accessories disconn.: Inact
  • New pump carter filling
  • Save routine
  • Self-adjust AGR
  • Self-adjustment pressure ctrl
  • cylinder 1 injector code entry
  • cylinder 2 injector code entry
  • cylinder 3 injector code entry
  • cylinder 4 injector code entry

  • Configuration

  • Lock Computer
  • Unlock Computer
  • Write Date Of Last After Sales Operation
  • Last intervention date setting

  • Accessories disconn.: Active
  • Accessories disconn.: Inact.
  • New pump carter filling
  • Save routine
  • Self-adjust AGR
  • Self-adjustment pressure ctrl
  • cylinder 1 injector code entry
  • cylinder 2 injector code entry
  • cylinder 3 injector code entry
  • cylinder 4 injector code entry

  • ECU ID Data
  • Last intervention date setting
  • Steering angle calibration

  • Rear brake unit initialization
  • Rear brake unit repositioning
  • Brake lining friction learning

  • Cylinder 1 Injector Coding
  • Cylinder 2 Injector Coding
  • Cylinder 3 Injector Coding
  • Cylinder 4 Injector Coding

  • New vehicles storage mode deactivation

  • Oil Change Interval In Km
  • Oil Change Interval In Months
  • Oil Change Range : Current Value In Km
  • Oil Change Range : Current Value In Months
  • Slope Sensor Adjustment
  • Update Odometer

  • With tyre pressure monitoring
  • Without tyre pressure monitoring
  • Vehicle type megane/scenic
  • Vehicle type megane with pax tyres
  • Vehicle type Vel statis

Functions and Features

 

  • Clear deployment record

  • Erase Remote Keys
  • Program Remote Key
  • Brake Pedal Position Sensor Learn
  • Clear Driver Window Learn Values
  • Clear Left Rear Window Learn Values
  • Clear Passenger Window Learn Values
  • Clear Right Rear Window Learn Values
  • ECU Control

  • Erase Key Set
  • Program Transponder-Keys

  • APP Learn
  • Adjust Idle Speed
  • Catalyst Reset
  • Clutch Pedal Position Learn
  • Crankshaft Position Reluctor Wheel Learn
  • Crankshaft Position Variation Learn
  • DPF Pressure Sensor Learn
  • DPF Reset
  • EGR Valve Learn
  • Exhaust Gas Temperature Sensor Learn
  • Engine Oil Life Reset
  • ECU Control
  • ECU Control-Electronic throttle control
  • Fuel Trim Reset
  • Flywheel Learn
  • Fuel Rail Pressure Sensor or Fuel Rail Learn
  • Glow Plug Control Module Reset
  • HO2S Heater Learn
  • Idle Learn
  • Inject Cutoff Test
  • Idle speed program
  • MAF Sensor Learn
  • Programming
  • Program Injector
  • Program Idle Speed
  • Program High Can Bus Configuration
  • RPM Control
  • Reset O2-Loop Block Learn Map
  • Reset Learned Values
  • Reset Engine Oil Life
  • Replace Rail Pressure Sensor
  • Replace Diff.-Press. Sensor
  • Replace Precatalyst
  • Replace MAF Sensor
  • Reset ECU
  • Replace O2 Sensor
  • Replace Injector
  • Replace Mass air flow sensor
  • Replace Diesel Particulate Filter
  • Regeneration DPF

  • Reset ECU

  • Erase Transponder-Keys And Remote
  • Program Transponder-Keys And Remote

  • Fuel Trim Reset

  • Gear Selector N Position Learn
  • Learned Values Reset

  • Park Brake Calibration

  • Brake Pressure Sensor Calibration
  • Yaw Rate Sensor Learn
  • Steering Wheel Angle Sensor Learns

  • Power Steering Softstops Reset
  • Power Steering Softstops Learn

  • HVAC Actuators Learn
  • CAN Bus Configuration Learn

  • Steering Angle Sensor Calibration

  • Erase Key Set
  • Program Transponder-Keys

  • Service Light Reset
  • Service Due In
  • CAN Bus Configuration Learn

  • Calibration

  • Power Steering Softstops Reset
  • Power Steering Softstops Learn

Functions and Features

 

  • Lateral accelerometer calibration
  • Longitudinal accelerometer sensor calibration
  • Pressure sensor calibration
  • Yaw Rate sensor calibration
  • Roll Rate sensor calibration

  • Driver's door window glass

  • Stepper motor replacement
  • Seat heater module calibration
  • Humidity sensor replacement

  • Fuel prime routine
  • Diesel particulate filter replacement
  • Reset the oil service counter

  • Transmission control module adaption clear
  • Transmission control module oil counter reset
  • Gear selector sensor calibration
  • Reset adaptions

  • Automatic Service Reset
  • Manual Service Reset

  • Powertrain control module adaption
  • Fuel prime routine

  • Sunroof calibration

  • Driver's seat calibration

  • Longitudinal accelerometer calibration
  • Drive the parking brake to the mounting position
  • Drive the parking brake to the latching position
  • Longitudinal accelerometer calibration
  • Parking brake pad replacement - Release to service position
  • Parking brake pad replacement - Exit maintenance mode application
  • Brake caliper replacement assembly test
  • Parking brake activation

  • Passenger's door window glass

  • Steering angle sensor calibration

  • Sliding roof module initialization
  • Rain sensor initialization
  • Driver's memory seat calibration

  • Headlamp control module system calibration

  • Read/set Injector Grades
  • Reset Adaptions
  • Diesel fueling adaption re- initialization
  • Oxygen sensor
  • Exhaust gas recirculation valve
  • Boost pressure actuator replacement
  • Throttle valve actor
  • Reset water in fuel detection
  • Oil change reset
  • Oxidation catalyst
  • Diesel particulate filter differential pressure sensor replacement
  • Diesel particulate filter replacement
  • Diesel particulate filter dynamic regeneration

  • Seat cushion replacement

Functions and Features

  • Read fault codes
  • Clean fault codes
  • Read real-time parameters
  • Component activation test
  • Component adaptations
  • Fault codes shown with available information
  • Read vehicle information (VIN, ECU)
  • ECU Coding
  • ECU Programming
  • Diesel engine, Gasoline engine, ABS, EDL, ASR, ESP, AIR-BAG, immobilizer
  • Instrument cluster, door electronics, steering column, and battery control
  • Vehicle electrical control unit - BCM, trailer function AHF, Radio-navigation
  • Special Functions List
  • ABS
  • EPS
  • PSCM
  • PATS
  • RCM
  • PCM
 

  • Configure the lateral acceleration sensor
  • Calibrate Longitudinal Acceleration Sensor
  • Configure the longitudinal acceleration sensor
  • Configure Both the Yaw Rate Sensor and the Lateral Acceleration Sensors
  • Configure All Three Sensors Together
  • Configure the steering angle sensor
  • Configure the pressure sensor
  • Configure the yaw rate sensor
  • Pressure Sensor Calibration
  • Module Initialization
  • Inhibit longitudinal accelerometer monitoring
  • Pressure calibration sensor
  • Yaw sensor. Calibration
  • Side acceleration sensor calibration
  • Steering angle calibration

  • Pressure calibration sensor
  • Yaw sensor. Calibration
  • Side acceleration sensor calibration
  • Steering angle calibration

  • Pull Drift Compensation
  • Straight Ahead Adaption Angle Reset

  • Key Programming

  • ECU ID Data

  • Reset Air Conditioning Compressor Learned
  • Reset Differential Pressure Sensor Learned Values
  • Reset Diesel Particulate Filter Differential Pressure Sensor Learned Values
  • Reset exhaust gas temperature value
  • Reset Exhaust Gas Recirculation Valve Learned Values
  • Reset Fuel Metering Valve Learned Values
  • Reset fuel pressure relief valve open count learned values
  • Reset fuel pressure relief valve open duration learned values
  • Reset Fuel Injection Pump Learned Values
  • Reset High Pressure Fuel System Learned Values
  • Reset Heated Exhaust Gas Oxygen Sensor Learned Values
  • Reset Intake Air Throttle Valve Learned Values
  • Reset KAM
  • Reset Knock Sensor Learned Values
  • Reset Mass Air Flow Sensor Learned Values
  • Reset Vehicle Speed Limit
  • Reset Powertrain Control Module Learned Values
  • Reset Turbocharger Variable Vane Position Sensor Learned Values
  • Reset water in fuel Warning Indicator
  • Diesel Particulate Filter Static Regeneration
  • Stop-Start Activation
  • Relearn Vehicle Data
  • KOEO On Demand Self-Test
  • Fuel Injector Coding
  • Fuel Injection Pump Learn
  • Fuel Injection Pilot Correction Learn
  • Fuel Injector Correction Factors
  • Initialize Exhaust Gas Related Component
  • Speeding Limiting
  • Key Programming
  • Fuel Injector Correction Factors
  • Engine Oil Quality History
  • Enter Fuel Injector Default Count Value

Functions and Features

 

  • Yaw rate sensor calibration
  • Lateral accelerometer calibration
  • Pressure sensor calibration
  • Powertrain configuration reset

  • Driver's side - Door glass window calibration

  • Tire pressure monitor receiver calibration
  • Tire pressure monitor confirmation application

  • Reset the oil service counter
  • Fuel prime routine
  • Diesel particulate filter replacement
  • Powertrain control module adaption clear
  • Reset water in fuel detection
  • Throttle valve actuator
  • Turbine shut-off valve
  • Exhaust gas recirculation valve
  • Oxygen sensor
  • Oxidation catalyst
  • Fuel lift pump

  • Service interval reset

  • Seat cover replacement

  • Stepper motor initialization

  • Driver's side-ynamic safety belt retract and release

  • Passenger's side-Dynamic safety belt retract and release

  • Sunroof calibration
  • Valet mode reset
  • Battery replacement
  • Tire pressure monitor sensor identification display

  • Passenger's side - Door glass window calibration

  • Rear differential control module calibration

  • Air suspension deflation
  • Air suspension inflation

  • Driver's side-Door glass window calibration

Functions and Features

 

  • Self test
  • Longitudinal acceleration sensor calibration
  • Steering angle calibration
  • Front LH Wheel bleeder
  • Front RH Wheel bleeder
  • Rear LH Wheel bleeder
  • Rear RH Wheel bleeder

  • Country mode change
  • Emergency flashing
  • Supply mode change
  • Audio system test
  • Convergence system restart
  • Key programming
  • Service Reset

  • Light setting corr
  • Safety belt alarm disabling
  • Safety belt alarm enabling
  • Service Reset
  • Headlamp position corrector: position 0
  • Headlamp position corrector: position 1
  • Headlamp position corrector: position 2
  • Headlamp position corrector: position 3
  • Trip Counter Reset
  • Next Service Km's reset
  • Oil service interval
  • Suspension calibration
  • Cylinder 2 injector replacement
  • Cylinder 3 injector replacement
  • Cylinder 4 injector replacement
  • Debimeter(air mass) sensor replacement(for preparation with lambda only)
  • Differential pressure sensor replacement(for preparation with DPF only)
  • Lambda probe replacement
  • Phonic wheel reset
  • Pre-catalyst replacement
  • Rail pressure sensor replacement
  • Reset self-adapting parameters
  • Self-learnt function reset
  • Impulse Ring zeroing
  • Particle filter regeneration

  • Air outlet learning

  • Key programming

  • Impulse ring adaptation
  • Throttle potentiometer adjustment
  • Engine Unlock
  • Throttle position self-learning
  • Differential pressure sensor replacement
  • Oil replacement -only with FAP filter
  • Precat. replac. -only with FAP filter
  • Self-learnt functions zeroing
  • Cyl. 1 injector code entry
  • Cyl. 2 injector code entry
  • Cyl. 3 injector code entry
  • Cyl. 4 injector code entry
  • Cyl. 5 injector code entry
  • Self-adaptation reset
  • Cylinder 1 injector replacement

  • Audio system test
  • Convergence system re-start
  • Roof lamp learning zeroing

  • ECU ID Data
  • Airbag ECU Reset
  • Airbag ECU Disable
  • ECU unlock

  • Service Reset

  • Steering angle calibration

  • Oil replacement -only with FAP filter

  • Rear differential control module calibration

  • Air suspension deflation
  • Air suspension inflation

-----------V31 Asia Software Description--------------

Functions and Features

 

  • Battery Pack Malf Fail-Safe Drive History Clear
  • VIN Read and VVIN Write

  • Check Mode
  • Reset Memory
  • A/T Code Registration
  • A/T Code Reset
  • AF/O2 Sensor Operation
  • All Readiness
  • VIN Read
  • Fuel Density Learning Value Reset
  • Switch Oil Maintenance Display
  • ATF Thermal Degradation Estimate Reset
  • CVT Oil Pressure Calibration
  • Deceleration Sensor Zero Point Calibration
  • Evaporative System Check
  • Learning Value Reset
  • Shift Control Synchronization

  • Battery Discharge
  • Discharge Data Monitoring
  • System Calibration

  • Check Mode
  • Steering Angle Adjust
  • Abnormal Operation History
  • Signal Check

  • Air Bleeding
  • Parts Exchange
  • Pressure Release

  • Transponder Code Registration
  • Transponder Code Erasure

  • Parts Exchange

  • Blower Motor Brush Wear Amount Initialization
  • Rear Cooler Servomotor Check
  • A/C Operation Limitation History Count Clear
  • Refrigerant Gas Volume Check
  • Servomotor Initialization

  • Check Mode
  • VIN Read
  • VIN Write
  • Normal Battery Stack Average Voltage Calculation
  • Customize
  • B1 Air Bleeding
  • Battery Diagnosis
  • Battery Diagnosis
  • Battery Status Info Update
  • HV Batt Cell Low Volt READY ON Prevention Cancel
  • Initialization
  • Inspection Mode
  • Prediagnostic Battery Charge
  • Reset Memory
  • Temporary Vehicle Start Up

  • Bluetooth Connection History
  • Map Information
  • Optical Disc Error History
  • Software Error History
  • Video Device Connection Check
  • Wi-Fi Connection History
  • Camera Synchronous Error History

  • DECU Exchange
  • Sensitivity Check
  • Zero Point Calibration/Sensitivity Check

  • Customize
  • A/T Code Registration
  • A/T Code Reset
  • All Readiness
  • Check Mode
  • CVT Oil Pressure Calibration

  • BSM Slave Abnormal History
  • BSM Slave Beam Axis Adjustment
  • BSM Slave Beam Axis Display
  • BSM Slave Beam Axis Inspection

  • BSM Master Abnormal History
  • BSM Master Beam Axis Adjustment
  • BSM Master Beam Axis Display
  • BSM Master Beam Axis Inspection

  • Initialization
  • Camera Axis Adjust
  • Camera/Target Position Memory
  • Control Mode
  • Front Beam Axis Adjustment
  • Front Beam Axis Misalignment Reading
  • Front Beam Axis Offset Reading
  • History Clear
  • Recog ECU H Temp Hist Reset

  • Recognition Camera Axis Adjust
  • Recognition Camera/Target Position Memory

  • All Readiness
  • ASG System Initial Learning

  • Check Mode
  • Ready ON Prevention Cancel (Power Feeding Relay)
  • Exit and Check DTCs
  • Enter Check Mode and Clear DTCs

  • Height Sensor Initialization
  • AHS Camera Optic Axis Adjustment
  • AHS Shade Angle Adjustment
  • ECU Information Sync

  • Automatic Camera Adjustment
  • Manual Camera Adjustment

  • Steering initializing

  • ECU Exchange
  • Starter Exchange

  • ECU information Sync
  • Height Sensor Initialization

  • ABS History
  • Air Bleeding
  • ECB-R Utility
  • Reset Memory
  • Test Mode
  • Inspection Mode
  • Signal Check
  • Brake Fluid Replacement
  • VSC/TR(A)C/4WD Control Prevention Mode

  • Abnormal Operation History
  • Signal Check
  • Check Mode
  • Torque Sensor Adjustment

  • ID Registration
  • Signal Check
  • Tire Position Write

  • Remote Engine Starter ID Registration
  • Remote Engine Starter Initial Registration
  • Trouble Factor Code Clear

  • Recognition Camera Axis Adjust
  • Control Mode
  • History Clear
  • PCS Image Information Clear
  • PCS Image Record Setting
  • Recognition Camera/Target Position Memory

  • Recognition Camera Axis Adjust

  • Communication Check (Key Diag Mode)
  • ECU Communication ID Registration
  • Smart/Key Code Erasure
  • Smart/Key Code Registration
  • Wireless Door Lock Diagnosis Mode

  • Beam Axis Adjustment
  • Beam Axis Misalignment Reading

Functions and Features

 

  • Battery Pack Malf Fail-Safe Drive History Clear
  • VIN Read and VVIN Write

  • Check Mode
  • Reset Memory
  • A/T Code Registration
  • A/T Code Reset
  • AF/O2 Sensor Operation
  • All Readiness
  • VIN Read
  • Fuel Density Learning Value Reset
  • Switch Oil Maintenance Display
  • ATF Thermal Degradation Estimate Reset
  • CVT Oil Pressure Calibration
  • Deceleration Sensor Zero Point Calibration
  • Evaporative System Check
  • Learning Value Reset
  • Shift Control Synchronization

  • Battery Discharge
  • Discharge Data Monitoring
  • System Calibration

  • Check Mode
  • Steering Angle Adjust
  • Abnormal Operation History
  • Signal Check

  • Air Bleeding
  • Parts Exchange
  • Pressure Release

  • Transponder Code Registration
  • Transponder Code Erasure

  • Parts Exchange

  • Blower Motor Brush Wear Amount Initialization
  • Rear Cooler Servomotor Check
  • A/C Operation Limitation History Count Clear
  • Refrigerant Gas Volume Check
  • Servomotor Initialization

  • Check Mode
  • VIN Read
  • VIN Write
  • Normal Battery Stack Average Voltage Calculation
  • Customize
  • B1 Air Bleeding
  • Battery Diagnosis
  • Battery Diagnosis
  • Battery Status Info Update
  • HV Batt Cell Low Volt READY ON Prevention Cancel
  • Initialization
  • Inspection Mode
  • Prediagnostic Battery Charge
  • Reset Memory
  • Temporary Vehicle Start Up

  • Bluetooth Connection History
  • Map Information
  • Optical Disc Error History
  • Software Error History
  • Video Device Connection Check
  • Wi-Fi Connection History
  • Camera Synchronous Error History

  • DECU Exchange
  • Sensitivity Check
  • Zero Point Calibration/Sensitivity Check

  • Customize
  • A/T Code Registration
  • A/T Code Reset
  • All Readiness
  • Check Mode
  • CVT Oil Pressure Calibration

  • BSM Slave Abnormal History
  • BSM Slave Beam Axis Adjustment
  • BSM Slave Beam Axis Display
  • BSM Slave Beam Axis Inspection

  • BSM Master Abnormal History
  • BSM Master Beam Axis Adjustment
  • BSM Master Beam Axis Display
  • BSM Master Beam Axis Inspection

  • Initialization
  • Camera Axis Adjust
  • Camera/Target Position Memory
  • Control Mode
  • Front Beam Axis Adjustment
  • Front Beam Axis Misalignment Reading
  • Front Beam Axis Offset Reading
  • History Clear
  • Recog ECU H Temp Hist Reset

  • Recognition Camera Axis Adjust
  • Recognition Camera/Target Position Memory

  • All Readiness
  • ASG System Initial Learning

  • Check Mode
  • Ready ON Prevention Cancel (Power Feeding Relay)
  • Exit and Check DTCs
  • Enter Check Mode and Clear DTCs

  • Height Sensor Initialization
  • AHS Camera Optic Axis Adjustment
  • AHS Shade Angle Adjustment
  • ECU Information Sync

  • Automatic Camera Adjustment
  • Manual Camera Adjustment

  • Steering initializing

  • ECU Exchange
  • Starter Exchange

  • ECU information Sync
  • Height Sensor Initialization

  • ABS History
  • Air Bleeding
  • ECB-R Utility
  • Reset Memory
  • Test Mode
  • Inspection Mode
  • Signal Check
  • Brake Fluid Replacement
  • VSC/TR(A)C/4WD Control Prevention Mode

  • Abnormal Operation History
  • Signal Check
  • Check Mode
  • Torque Sensor Adjustment

  • ID Registration
  • Signal Check
  • Tire Position Write

  • Remote Engine Starter ID Registration
  • Remote Engine Starter Initial Registration
  • Trouble Factor Code Clear

  • Recognition Camera Axis Adjust
  • Control Mode
  • History Clear
  • PCS Image Information Clear
  • PCS Image Record Setting
  • Recognition Camera/Target Position Memory

  • Recognition Camera Axis Adjust

  • Communication Check (Key Diag Mode)
  • ECU Communication ID Registration
  • Smart/Key Code Erasure
  • Smart/Key Code Registration
  • Wireless Door Lock Diagnosis Mode

  • Beam Axis Adjustment
  • Beam Axis Misalignment Reading

Functions and Features

  • Read fault codes
  • Clean fault codes
  • Read real-time parameters
  • Component activation test
  • Component adaptations
  • Fault codes shown with available information
  • Read vehicle information (VIN, ECU)
  • ECU Coding
  • ECU Programming
  • Diesel engine, Gasoline engine, ABS, EDL, ASR, ESP, AIR-BAG, immobilizer
  • Instrument cluster, door electronics, steering column, and battery control
  • Vehicle electrical control unit - BCM, trailer function AHF, Radio-navigation
  • Special Functions List
  • ABS TCS VSA
  • Body (Gauges)
  • Body (Keyless)
  • Diesel
  • PGM FI
  • Body (Front panel)
  • Body (HF Link / TEL)
  • Body (Power windows)
  • IMMOBI
  • SRS
 

  • All sensors calibration

  • Gauge Control Module Replacement

  • Keyless Check

  • ECM Reset
  • DPF Differential Pressure Sensor Initial Learn
  • MAF Sensor Learning Clear
  • Reset Calculated PM Value
  • AF Sensor 1 Learning Clear
  • ISV Forced Learning
  • DPF Regeneration

  • TP sensor reset
  • Replace ECM/PCM

  • Front Panel Check

  • Passcode clear

  • Power Window Reset for Driver side
  • Power Window Reset for Passenger side
  • Power Window Reset for Left side
  • Power Window Reset for Right side

  • Add one key or more than one keys
  • Rewrite keys
  • All keys lost
  • Delete Keys
  • Replace ECM/PCM

  • OPDS initialization

Functions and Features

  • Read fault codes
  • Clean fault codes
  • Read real-time parameters
  • Component activation test
  • Component adaptations
  • Fault codes shown with available information
  • Read vehicle information (VIN, ECU)
  • ECU Coding
  • ECU Programming
  • Diesel engine, Gasoline engine, ABS, EDL, ASR, ESP, AIR-BAG, immobilizer
  • Instrument cluster, door electronics, steering column, and battery control
  • Vehicle electrical control unit - BCM, trailer function AHF, Radio-navigation
  • Special Functions List
  • ABS TCS VSA
  • Body (Gauges)
  • Body (Keyless)
  • Diesel
  • PGM FI
  • Body (Front panel)
  • Body (HF Link / TEL)
  • Body (Power windows)
  • IMMOBI
  • SRS
 

  • All sensors calibration

  • Gauge Control Module Replacement

  • Keyless Check

  • ECM Reset
  • DPF Differential Pressure Sensor Initial Learn
  • MAF Sensor Learning Clear
  • Reset Calculated PM Value
  • AF Sensor 1 Learning Clear
  • ISV Forced Learning
  • DPF Regeneration

  • TP sensor reset
  • Replace ECM/PCM

  • Front Panel Check

  • Passcode clear

  • Power Window Reset for Driver side
  • Power Window Reset for Passenger side
  • Power Window Reset for Left side
  • Power Window Reset for Right side

  • Add one key or more than one keys
  • Rewrite keys
  • All keys lost
  • Delete Keys
  • Replace ECM/PCM

  • OPDS initialization

Functions and Features

 

  • Variant Code Reset(ESP Only)
  • Steering Angle Sensor Variant Code Reset(ESP Only)
  • Longitudinal G Sensor Calibration

  • CPF Service Regeneration

  • Variant Code Reset(ESP Only)

  • Code saving

  • Throttle valve

  • Throttle valve

  • Throttle valve

  • Throttle valve

  • Throttle valve

  • Throttle valve

  • Password Changing Teaching Neutral Mode Limp Home Mode

  • CPF Service Regeneration

  • Steering Angle Sensor Variant Code Reset(ESP Only)
  • Longitudinal G Sensor Calibration

  • Throttle valve

  • Throttle valve

  • Throttle valvet

  • Throttle valve

  • Code saving

  • Code saving

Functions and Features

 

  • CPF Change (CPF OPT)Throttle valve

  • CPF Change (CPF OPT)Throttle valve

  • Throttle valve

  • CPF Change (CPF OPT)Throttle valve

  • CPF Change (CPF OPT)Throttle valve

  • Throttle valve

  • CPF Change (CPF OPT)Throttle valve

  • CPF Change (CPF OPT)Throttle valve

  • CPF Change (CPF OPT)Throttle valve

  • Resetting Adaptive Values

  • Resetting Adaptive Values

  • Resetting Adaptive Values

  • Resetting Adaptive Values

  • Resetting Adaptive Values

  • Resetting Adaptive Values

  • Resetting Adaptive Values

  • Resetting Adaptive Values

  • Resetting Adaptive Values

  • Resetting Adaptive Values

  • Resetting Adaptive Values

  • Resetting Adaptive Values

  • Code Saving

  • Resetting Auto T/A Values

  • Steering Angle Sensor Variant Code Reset
  • Longitudinal G Sensor Calibration(ESP Only)

Functions and Features

  • Read fault codes
  • Clean fault codes
  • Read real-time parameters
  • Component activation test
  • Component adaptations
  • Fault codes shown with available information
  • Read vehicle information (VIN, ECU)
  • ECU Coding
  • ECU Programming
  • Diesel engine, Gasoline engine, ABS, EDL, ASR, ESP, AIR-BAG, immobilizer
  • Instrument cluster, door electronics, steering column, and battery control
  • Vehicle electrical control unit - BCM, trailer function AHF, Radio-navigation
  • Special Functions List
  • NATS
  • Engine
  • Expert Function
 

  • Pin Read
  • C/U Initialization
  • C/U Initialization
  • Erase I-key ID
  • Confirm I-key ID
  • Register STRG Lock Id
  • Steering Lock Release (Key ID Erase)

  • TP/SW sensor idle position adjust
  • Ignition timing adjust
  • Fuel pressure release
  • Idle air volume learn
  • Target ignition timing adjust
  • Target idle rpm adjust

  • Fuel pressure release
  • Idle air volume learn
  • Reset setting value
  • Door lock-unlock set
  • Automatic door lock select
  • Automatic door unlock select
  • Automatic door lock/unlock select
  • Auto lock set
  • Illumination delay set
  • Wiper speed setting
  • Security alarm set

Functions and Features

  • Read fault codes
  • Clean fault codes
  • Read real-time parameters
  • Component activation test
  • Component adaptations
  • Fault codes shown with available information
  • Read vehicle information (VIN, ECU)
  • ECU Coding
  • ECU Programming
  • Diesel engine, Gasoline engine, ABS, EDL, ASR, ESP, AIR-BAG, immobilizer
  • Instrument cluster, door electronics, steering column, and battery control
  • Vehicle electrical control unit - BCM, trailer function AHF, Radio-navigation
  • Special Functions List
  • NATS
  • Engine
  • Expert Function
 

  • Pin Read
  • C/U Initialization
  • C/U Initialization
  • Erase I-key ID
  • Confirm I-key ID
  • Register STRG Lock Id
  • Steering Lock Release (Key ID Erase)

  • TP/SW sensor idle position adjust
  • Ignition timing adjust
  • Fuel pressure release
  • Idle air volume learn
  • Target ignition timing adjust
  • Target idle rpm adjust

  • Fuel pressure release
  • Idle air volume learn
  • Reset setting value
  • Door lock-unlock set
  • Automatic door lock select
  • Automatic door unlock select
  • Automatic door lock/unlock select
  • Auto lock set
  • Illumination delay set
  • Wiper speed setting
  • Security alarm set

Functions and Features

 

  • SAS Calibration
  • Yaw rate sensor type reset
  • Emission Gas Mode
  • Sensor calibration
  • Valve pressure learning
  • Emission Gas Mode
  • Sensor calibration
  • G sensor calibration

  • Rain Sensor Adaptation

  • Customization Information
  • Customization Reset
  • Theft alarm
  • Keyless Reception Check
  • Keyless ID Registration
  • Reset
  • On Vehicle Chassis No/VIN Writing
  • Off Vehicle Chassis No/VIN Writing
  • Coding Information/Copy
  • Option Coding

  • Calibration SAS

  • Change Password
  • Key Registration(Barcode No.)
  • Key Registration/KOS key Reg.
  • Steering lock unit Reg.
  • Comm. Test
  • ENG key code Reg/Chassis No. Reg.
  • Chassis No Information
  • Chassis No Writing
  • Keyless ID Reg

  • Provisional DTCs
  • Learned value reset
  • Timing chain maintenance
  • Learning
  • Initialization
  • INJ.ID Writing(Exchanging INJ.)
  • Engine Test

  • Test
  • Learned value reset
  • Provisional DTCs

  • sensor calibration
  • Air bleeding
  • Test

  • Service reminder
  • Coding

  • Tire Pressure Sensor ID Check
  • Tire Pressure Sensor ID Registration

  • SRS ECU Initialization

Functions and Features

  • Read fault codes
  • Clean fault codes
  • Read real-time parameters
  • Component activation test
  • Component adaptations
  • Fault codes shown with available information
  • Read vehicle information (VIN, ECU)
  • ECU Coding
  • ECU Programming
  • Diesel engine, Gasoline engine, ABS, EDL, ASR, ESP, AIR-BAG, immobilizer
  • Instrument cluster, door electronics, steering column, and battery control
  • Vehicle electrical control unit - BCM, trailer function AHF, Radio-navigation
  • Special Functions List
  • GEM
  • SCR
  • VSM
  • PCM
  • ABS
  • TCM
  • EPS
 

  • Rain Sensor Reset

  • Urea Hose Leak Test
  • Urea Injector Test
  • Urea Pump Test

  • Clear Freeze Frame Data

  • KOEO On Demand Self Test
  • DPF Assessment
  • DPF Regeneration
  • Reset PCM
  • Reset Engine Oil
  • Reset Fuel Pump
  • Reset Injector
  • Reset MAF Sensor
  • Reset DPF Pressure Sensor
  • ETB/EGR initialization
  • Data Reset
  • Reset O2/Air Fuel Ratio (A/F) Sensor
  • Reset SCR Converter

  • Brake fluid pressure sensor
  • Yaw rate sensor Initialization
  • Lateral Acceleration Sensor Initialization
  • Longitudinal Acceleration Sensor Initialization
  • ABS service Bleed
  • Steering Angle Sensor Initialization

  • Neutral Position Learning

  • Calibration After Parts Removal or Replacement
  • Restoration Procedure for DTC_C1B00_95
  • Restoration Procedure for DTC_C1B00_54
  • Neutral Position Setting

Functions and Features

  • Read fault codes
  • Clean fault codes
  • Read real-time parameters
  • Component activation test
  • Component adaptations
  • Fault codes shown with available information
  • Read vehicle information (VIN, ECU)
  • ECU Coding
  • ECU Programming
  • Diesel engine, Gasoline engine, ABS, EDL, ASR, ESP, AIR-BAG, immobilizer
  • Instrument cluster, door electronics, steering column, and battery control
  • Vehicle electrical control unit - BCM, trailer function AHF, Radio-navigation
  • Special Functions List
  • Engine
  • Powertrain
 

  • Program VIN
  • Lock ECU

  • Read/Store Trim Data
  • Programming Trim Data
  • Reset Immobilizer Function
  • Program VIN
  • Lock ECU
  • Injector ID Code
  • ID Code Registration

Functions and Features

 

  • Freeze Frame
  • Function Check Sequence

  • Compulsory Height Control

  • Function Check Sequence

  • ECU Customize
  • Fan check menu
  • Keyless ID Registry

  • Collation ECM output check
  • Keyless access system check
  • Power supply ECU output check
  • Keyless ID Register

  • Transmitter ID register confirm

  • Function Check Sequence
  • Dealer Check Mode Procedure
  • AT learning mode
  • Oil inspection mode
  • Rear differential inspection mode
  • AWD ON/OFF switching mode
  • Clear Memories 2

  • Variable compressor break-in drive
  • Freeze Frame

  • Sensor initial setting

  • Sensitivity Adjustment Mode

  • Dealer Check Mode Procedure
  • System Operation Check Mode
  • Diagnosis Results
  • Cancel Code(s) Display
  • DPF maintenance
  • Oil maintenance mode
  • Maintenance at the time of ECM replacement
  • Injector or Engine Replacement
  • ECM Replacement
  • Injector Code Display
  • Fuel pump duty learning
  • Fuel injector injection amount learning
  • EGR valve opening angle learning

  • Re-zeroing

  • Freeze Frame
  • Force Sensor Calibration Mode
  • Brake-in Parking Brake Drive Mode
  • Parking Brake Removal Mode
  • Clutch Engagement Position Mode
  • Clutch Sensor Calibration Mode
  • Parameter Initialization Mode

Functions and Features

  • Read fault codes
  • Clean fault codes
  • Read real-time parameters
  • Component activation test
  • Component adaptations
  • Fault codes shown with available information
  • Read vehicle information (VIN, ECU)
  • ECU Coding
  • ECU Programming
  • Diesel engine, Gasoline engine, ABS, EDL, ASR, ESP, AIR-BAG, immobilizer
  • Instrument cluster, door electronics, steering column, and battery control
  • Vehicle electrical control unit - BCM, trailer function AHF, Radio-navigation
  • Special Functions List
  • ABS
  • AT
  • Engine
  • Gear Control
  • Instrumentation
  • Airbag
  • Central electric
  • ESP
  • Immobilizer
  • Meter
 

  • Bleed
  • Steering Angle Sensor Calibration
  • Acceleration Sensor Calibration
  • EBC430 repair cycle

  • Read oil counter
  • Read oil change date
  • Read after sales date
  • Write date after sales operation
  • Write oil change date
  • Reinit oil counter
  • Reinit auto adaptive
  • Note oil counter
  • Reinit convert lockup adaptive

  • Vehicle configuration
  • Adjust idle speed
  • Provisional DTCs
  • All Learned value
  • Read/Write learned value
  • Learned value reset
  • Test/limit value readout

  • Read Clutch Adaptation
  • Erase Clutch Adaptation
  • Clutch Adaptation

  • Interval Service Reset

  • Locking of ignition
  • Unlocking of Ignition
  • Read date of after sales
  • Write date of after sales

  • System Self-test

  • Steering Angle Sensor Calibration
  • Acceleration Sensor Calibration
  • Bleed

  • Siemens immobilizer key coding
  • Siemens immobilizer key clear

  • Diagnose mode start
  • Reminder reset
  • Next schedule reminder cancel
  • Extra reminder setting
  • Extra reminder cancel
  • Periodic reminder schedule set
  • Integrated value adjustment
  • Optional INT schedule setting

Functions and Features

  • Read fault codes
  • Clean fault codes
  • Read real-time parameters
  • Component activation test
  • Component adaptations
  • Fault codes shown with available information
  • Read vehicle information (VIN, ECU)
  • ECU Coding
  • ECU Programming
  • Diesel engine, Gasoline engine, ABS, EDL, ASR, ESP, AIR-BAG, immobilizer
  • Instrument cluster, door electronics, steering column, and battery control
  • Vehicle electrical control unit - BCM, trailer function AHF, Radio-navigation
  • Special Functions List
  • SRS
  • ABS
  • Engine/EFI 1.0/MPI
  • Gear control
  • Immobilizer
 

  • Reset Memory

  • Reset Memory

  • Reset Memory

  • Reset Memory

  • Initialization of immobilizer
  • Reset Memory

Functions and Features

  • Read fault codes
  • Clean fault codes
  • Read real-time parameters
  • Component activation test
  • Component adaptations
  • Engine, ABS, EDL, ASR, ESP, SRS, immobilizer, HVAC, BCM, TPMS
 

Functions and Features

  • Read fault codes
  • Clean fault codes
  • Read real-time parameters
  • Component activation test
  • Component adaptations
  • Gasoline engine, diesel engine, ABS, automatic transaxle, air bag, four wheel drive system, power steering system
 

Functions and Features

  • Read fault codes
  • Clean fault codes
  • Read real-time parameters
  • Component activation test
  • Component adaptations
  • Engine, ABS, transmission, Airbag, EPS, IMMO
 

Functions and Features

  • Read fault codes
  • Clean fault codes
  • Read real-time parameters
  • Component activation test
  • Component adaptations
  • Engine, ABS, transmission, Airbag
 
Technical Parameter

Operating system

Win10 OS supporting multitasks and managing system resources

Processor

1.44GHz, quad-core processor

Memory

2GB RAM & 32GB Solid State Drive (64G Option Extension Available)

Audio input/output

high sound quality speaker SPK-AY180-1B-8F

Display

10.1 Inch Intel Quad Core (1280*800 pixels), IPS 10-point capacitive touch

screen, all viewing angle Dual Camera

Communication

Dual-band (2.4GHz & 5.0GHz); 802.11n Wi-Fi to access your favorite web

resources

External interface

2.0 USB and 3.0 USB interface; Scalable, more functions, high fidelity audio, headset interface

VCI connection

Bluetooth wireless connection; WIFI connection up to 240mworking range

Camera

rear 5-megapixel camera;  Front 2-megapixel camera

Input voltage

12V(9-24V)

Connectivity

Ethernet: RJ45 Ethernet Connection

Cellular: 3G/4G module: WCDMA

Power consumption

6.5W

Power supply

DC 8~15V

AC 110~250V 50Hz

Battery

11000 mAh 3.7 V lithium-polymer rechargeable lithium-ion battery;

Charging via 12V vehicle power

Working temperature

-10~55ºC (14 to 131 ℉)

Storage temperature

-20~70ºC (-4 to 158 ℉)

Humidity

<90%;

Package  (WxHxD)

640 mm (19.67”) x 180 mm (4.72”) x 420mm (13.78”)

Weight (kg)

NW: 9.7kg (3.53 lb)

GW:10.5kg (19.84 lb)

 

 

 

 

 

 

 

 

 

 

 

 

V31 Configuration

 

Name:

V31 MAIN UNIT

Quantity:

1 pcs

Function:

Dispy testing procedures and informationla

 

Name:

V31 VCI

Quantity:

1 pcs

Function:

Communication with V31 main unit

 

Name:

SUITCASE

Quantity:

1 pcs

Function:

Used to load V31 cables and connectors

 

Name:

CHERY/FIAT -3 PIN

Quantity:

1 pcs

Function:

Used for testing FIAT vehicles equipped with a 3-pin DLC.

 

Name:

GM/DAEWOO-12 PIN

Quantity:

1 pcs

Function:

Used for testing GM/DAEWOO vehicles equipped with a 12-pin DLC

 

Name:

KIA-20 PIN

Quantity:

1 pcs

Function:

Used for testing KIA vehicles equipped with a 20-pin DLC

 

Name:

MAZDA-17 PIN

Quantity:

1 pcs

Function:

Used for testing MAZDA vehicles equipped with a 17-pin DLC

 

Name:

TOYOTA-17 PIN

Quantity:

1 pcs

Function:

Used for testing TOYOTA/LEXUS vehicles equipped with a semi-circular 17pin DLC

 

Name:

TOYOTA-22 PIN

Quantity:

1 pcs

Function:

Used for testing Toyota and Lexus vehicles with a rectangular 22-pin DLC

 

Name:

HONDA-3 PIN

Quantity:

1 pcs

Function:

Used for testing HONDA and ACURA vehicles equipped with a 3-pin DLC

 

Name:

NISSAN-14 PIN

Quantity:

1 pcs

Function:

Used for testing Nissan and Infiniti vehicles equipped with a 14-pin DLC

 

Name:

OBDII

Quantity:

1 pcs

Function:

Used for testing all vehicles compliant with OBDII, EOBD and J1962 with the 16-pin DLC

 

Name:

CITROEN-16 PIN

Quantity:

1 pcs

Function:

Used for testing Citroen with the 16-pin DLC according to software screen indicator

 

Name:

FIAT-16 PIN

Quantity:

1 pcs

Function:

Used for testing Fiat with the 16-pin DLC according to software screen indicator

 

Name:

BMW-20 PIN

Quantity:

1 pcs

Function:

Used for testing BMW vehicles equipped with a 20-pin DLC

 

Name:

HYUNDAI/MITSUBISHI-12+16 PIN

Quantity:

1 pcs

Function:

Used for testing Mitsubishi and Hyundai vehicles equipped with a 12-pin or 16-pin DLC

 

Name:

MERCEDES BENZ 38 PIN (optional)

Quantity:

1 pcs

Function:

Used for testing Mercedes-Benz vehicles equipped with a circular 38-pin DLC

 

Name:

MERCEDES BENZ 4 PIN

Quantity:

1 pcs

Function:

Used for testing Mercedes-Benz vehicles before 1997 with flash codes. Those vehicles are usually equipped with either a rectangular 8-pin or 16-pin DLC

 

Name:

AUDI-2+2 PIN

Quantity:

1 pcs

Function:

Used for testing VW/AUDI vehicles with a 4-pin (2x2) DLC

 

Name:

MAIN CABLE

Quantity:

1 pcs

Function:

Connect the main unit & connectors for diagnosis

Name:

JUMPER

Quantity:

1 pcs

Function:

Short circuit test for flash code reading

 

Name:

BATTERY POWER CABLE

Quantity:

1 pcs

Function:

Provide the power supply via battery

 

Name:

CIGARETTE LIGHTER POWER CABLE

Quantity:

1 pcs

Function:

Provide the power supply via cigarette lighter on the car

Name:

USB CABLE

Quantity:

1 pcs

Function:

Provide the car testing as optional

Name:

DC ADAPTOR

Quantity:

1 pcs

Function:

Provide 12V DC voltage

 

Used to test Mercedes-Benz Sprinter

Name:

MERCEDES BENZ-14 PIN

Quantity:

1 pcs

Function:

Used to test Mercedes-Benz Sprinter

 

+ Autek V31 Automotive Diagnosis Solution

Automotive Diagnostic Tools for professional technicians, shop owners, and educators!

The V31 Automotive Diagnosis Solution was designed for the professional technician who demands more functionality. With its crystal clear 10.1” LED capacitive touch screen, a powerful quad-core processor, and Ethernet port allowing the technician to expand upon its advanced, sensor initialization, coding, adaptations and programming capabilities. 

The V31 Automotive Diagnosis Solution has the industry’s first multitasking with Windows 10 Operating System and the comprehensive OE-level vehicle coverage that Autek has become known for. The V31 Automotive Diagnosis Solution is the perfect diagnostic solution for shops and technicians who demand unrivalled smart technology and repairs.

The V31 Automotive Diagnosis Solution includes a wireless Vehicle Communication Interface (VCI), all necessary adaptors for 1996 & newer vehicles, software for Domestic, Asian, & European vehicles, and all cables needed to get the job done, as well as one year of FREE technical support and updates.

 

+ Autek V31  - TOP OF THE RANGE Brand New for 2016

Dealer Level Auto Diagnostics Solutions with Affordable Price

Extensive vehicle coverage for more than EIGHTY (80) US, Asian and European Manufacturers

Hundreds of different models - old and new covered with additional coding and programming capability

More than 40 mainstream manufacturers brands covered including the following:

AUDI, BENZ, BMW, DACIA, EU FORD, LANDROVER, MINI, OPEL, PEUGEOT, RENAULT, SEAT, SKODA, VW, VOLVO, SMART, JAGUAR, BENZ SPRINTER, SAAB, FIAT,LACIA, ALFA ROMEO, VAUXHALL, MAYBACH, BENTLEY, PORSCHE,GM, CHRYSLER, FORD,SUZUKI, KIA, DAWEOO, ISUZU, TOYOTA, SUBARU, SCION, NISSAN, MITSUBISHI, LEXUS, INFINITI, HYUNDAI, HONDA, ACCURA, MAZDA.

 

+ Unrivalled Speed

The V31 is the fastest scanner ever in the market. It features an extraordinarily fast a quad-core 1.44GHz processor that offers 50% increase in speed versus competing products.

A 32G solid state hard drive and a highly sensitive 10.1’’ LED capacitive touch screen with high resolution of 1280 x 800 pixels. The system boots up in only 20 seconds, which is 5 times faster than other brands, and the diagnostic time for vehicles is greatly reduced, allowing you to perform your job much quicker.

The Windows 10 Operating System allows you perform the multiple tasks easily and intuitively. Combined with the best coverage of OE-level diagnostics, the V31 is the perfect diagnostic solution for shops and technicians who demand unrivalled smart technology for smart repairs.

 

 

+ Ultrafast Wireless

The V31features advanced dual-band(2.4GHz and 5GHz)802.11n Wi-Fi that’s up to twice as fast as any previous-generation diagnostic systems. The V31 Vehicle Communication Interface (VCI) connects via dependable Long-Range Class 1 Bluetooth to the host tablet. Once the wireless VCI is connected to the car, the technician is completely free to move around anywhere in the shop. Its wireless connectivity also means you can field updates to the latest software releases, allowing for update anywhere and anytime.

As the fastest growing diagnostic company in the world, Autek has been committed to providing the best and easiest-to-use diagnostic solution with the most extensive coverage of all systems for all the major vehicle manufacturers. This enables independent garages to confidently provide comprehensive servicing in their own workshops without relying on dealer availability. Continual software enhancement will provide additional vehicle coverage.

 

+ ECU Coding and Programming

The Coding function is used to configure the vehicle control modules (ECUs) with extra parameters, while Programming is used to re-flash the vehicle ECUs.

These functions allow you to update the computer software on the vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or replacements. The V31 is one of the very few diagnostic systems in the world enabling low cost coding and flash programming

 

 

+ Instant Software Updates

To keep up with the continuing development of vehicle manufacturers, continuous software improvement is essential for any diagnostic system. The V31 intelligent auto diagnosis solution was designed with this in mind. Whenever any unknown new vehicle model or a diagnostic error is reported, usually within 48 hours, custom software updates will be made available for the user to download.

 

 

+ Real World Ruggedness

Built tougher than any other rugged tablet on the market, the AUTEK V31 intelligent auto diagnosis solution outstrips the competition in performance, features, durability, and resiliency.

We’ve put each V31 intelligent auto diagnosis solution ultra-rugged tablet model through rigorous challenges and tested to MIL-STD-810G standards – and beyond – to ensure it thrives in hazardous locations and factory environments alike.

 

+ Unique Three Different Supporting Angles

The V31 intelligent auto diagnosis solution providing three angles for the supporting bracket:

0 degree:    Folding back the main unit

90 degree:   Standing on the desk for indoor demonstration

180 degree:  Hanging from engine hood, easy for car repair

 

+ Features of the V31 Automotive Diagnosis Solution

• Dealer Level Auto Diagnostics Solutions With Affordable Price

• Records And Playbacks Live Data To Pinpoint Troubles Of Sensors And Components

• 10.1“, 1280x800 Pixel LED-Backlit Glossy Widescreen Multi Touch Display With IPS Technology

• Data Logging Allows Quick & Accurate Technical Support & Solutions

• Internet Reliable And Fast 32GB Solid State Drive For Better Performance

• WI-FI Wireless To Access Your Favorite Web Resources & Automatically Update New Software

• Displays Live Data In Text, Graph & Analog For Easy Data Review And Analysis

• Remote Technical Support For Convenient Demonstration & Training And increased Customer Satisfaction With TeamViewer Aids

• Configure Live Data Display, Set Alarms, Record, And Playback Data Frames With One Touch

• Intelligent Memory Of Vehicles For Easy And Quick Diagnosis Of Tested Vehicles

• Unique Shop Tough Ergonomic Design Features Strong Rugged Protection

• Easy And Intuitive Navigation Makes Finding What You Need Simple And Fast

• The VCI Connects Wirelessly To The Main Unit With Ultra-Range Bluetooth

• USB, Audio, And Auxiliary Ports Make It Easy To Connect Accessories

• Built-in 5-Megapixel Rear Camera and 2-Megapixel Front Camera with Autofocus

• Using Windows 10 Platform Because Of More Stable Than Android

• Complete Function Capability For Codes, Live Data, Actuation Tests, Adaptations, And Coding

• Extensive Vehicle Coverage For More Than 80 US, Asian And European Vehicle Makes

• Prints Out Recorded Data Anytime And Anywhere With Wi-Fi Technology

  

A.ACKA Audi/VW/Skoda/Seat Channel I

ACKA Audi/VW/Skoda/Seat Channel Information

Channel 001: Electronic throttle (throttle self-adaptation)

Channel 002: Mass Air Flow Sensor (MAFS) detection

Channel 003: Exhaust Gas Recirculation (EGR)

Channel 008: Vacuum pump test (short distance)

Channel 011: Stamping control

Channel 028: ignition (Knock sensor test-short distance)

Channel 034: Oxygen sensor control (aging test: cylinder bank 1, sensor 1)

Channel 035: Oxygen sensor control (aging test: cylinder bank 2, sensor1)

Channel 036: Oxygen sensor control (sensor ready-after catalyst converter)

Channel 037: Oxygen sensor control (oxygen sensor variance, cylinder bank 1)

Channel 038: Oxygen sensor control (oxygen sensor variance, cylinder bank 2)

Channel 039: Oxygen sensor control (sensor exchange)

Channel 043: Oxygen sensor control (aging test: cylinder bank 1, sensor 2)

Channel 044: Oxygen sensor control (aging test: cylinder bank 2,sensor 2)

Channel 046: Oxygen sensor control (catalyst conversion testing, cylinder bank 1)

Channel 047: Oxygen sensor control (catalyst conversion testing, cylinder bank 2)

Channel 048: Oxygen sensor control (Catalyst converter thermal diagnosis, cylinder bank 1)

Channel 060: Electronic throttle (throttle self-adaptation)

Channel 063: Electronic throttle (forced downshift switch self-adaptation)

Channel 070: Emission lowered (EVAP valve testing)

Channel 071: Emission reduction (leakage diagnosis system)

Channel 074: Exhaust gas recirculation (EGR) valve misalignment

Channel 075: Emission reduction (Exhaust gas recirculation)

Channel 077: Emission reduction (secondary air injection, cylinder bank 1)

Channel 078: Emission reduction (secondary air injection, cylinder bank 2)

Channel 094: Inlet camshaft adjustment

Channel 096: Camshaft adjustment (exhaust)

Channel 098: Electronic throttle (throttle self-adaptation)

Channel 099: Oxygen sensor control cutoff

Channel 103: Fuel injection (fuel pump self-adaptation)

Channel 107: Fuel injection (fuel supply system)

Channel 130: Engine cooling (electronic cooling system)

Channel 140: Fuel supply system (fuel pressure lower)

Channel 142: Fuel supply system (self-adaptation of intake channel flap, cylinder bank 1)

Channel 145: test of exhaust gas temperature sensor

Channel 146: NOX storage catalyst, cylinder bank 1

Channel 148: Desulfuration NOX memory catalyst, cylinder bank 1

Channel 152: NOX sensor offset

Channel 190: Oxygen sensor control (aging test: cylinder bank 1, sensor 3)

Channel 191: Leakage diagnosis, secondary air injection

Channel 200: Ready code (automatic "vehicle EOL" test)

Channel 238: Fuel injection (fuel pump self-adaptation)

Channel 243: Fuel pump misalignment

Channel 000: Reset self-learning values

Channel 001: Idle speed adjustment

Channel 002: Torque limit

Channel 003: Engine load calibration

Channel 004: Calibration of servo pump load

Channel 005: Exhaust gas recirculation (EGR)

Channel 006: Idle speed

Channel 007: Maximum speed limit

Channel 008: Coolant temperature calibration

Channel 009: Calibration of air-conditioner compressor torque

Channel 012: Soot mass calibration

Channel 050: Immobilizer (vehicle data self-adaptation)

Channel 091: Immobilizer status

Channel 000: Forced downshift self-adaptation

Channel 001: Brake pump exhaust

Channel 001: Steering angle sensor (G85) misaligned

Channel 003: System function test activated

Channel 040: Longitudinal acceleration sensor off (G251)

Channel 042: Tire pressure monitoring system (TPMS) resetting

Channel 060: Steering angle sensor adjustment (G85)

Channel 061: Speed lateral/longitudinal accelerate sensor adjustment (G200/G202/G251)

Channel 063: Lateral accelerate sensor adjustment (G200)

Channel 066: Brake pressure sensor adjustment (G201)

Channel 068: Speed sensor adjustment (G202)

Channel 069: Longitudinal accelerate sensor adjustment (G251)

Channel 093: ESP (electronic stability program) driving test initialization

3.2 Adaptation

Channel 056: Trailer stability

Channel 058: Down-hill assist control (HHA)

Channel 000: Throttle motor position self-adaptation

Channel 001: Throttle motor foundation setting

Channel 001: Control motor of air flow air valve (V71)

Channel 002: Control motor of recirculation gas air valve (V113)

Channel 004: Current limitation of air-conditioner regulating valve (N280)

Channel 006: Auxiliary heating/ventilation assistance

Channel 007: Auxiliary heating/ventilation cutoff

Channel 009: Self-adaptation channel resetting (based on code)

Channel 011: Solar energy roof

Channel 015: Fresh air blower (V2) rotate speed during auxiliary heating/ventilation

Channel 021: Engine heating by auxiliary heating

Channel 022: Fresh air blower (V2) features

Channel 023: Temperature features

Channel 081: Self-adaptation values (vehicle data)

Channel 001: Foundation setting of seat occupation identification control module (J706)

Channel 000: Seat occupation identification resetting

Channel 001: Front passenger’s airbag off

Channel 002: Front driver's airbag off

Channel 003: Airbag off at front passenger’s side

Channel 004: Airbag off at front driver's side

Channel 005: Front passenger's seatbelt tensioner off

Channel 006: Front driver's seatbelt tensioner off

Channel 007: Front passenger's head airbag off

Channel 008: Front driver's head airbag off

Channel 011: Rear driver's seatbelt tensioner off

Channel 012: Rear driver's seatbelt tensioner off

Channel 013: Passenger's seat occupation identification sensor off

Channel 014: Battery separation off

Channel 017: Front passenger's knee airbag off

Channel 017: Anti-rollover column off

Channel 018: Anti-rollover triggering counter resetting

Channel 018: Front driver knee airbag off

Channel 019: Rear central driver's safety belt tensioner off

Channel 020: Front airbag off switch invalid

Channel 021: Anti-rollover column off

Channel 021: Battery separation relay (J655) off

Channel 050: ESP (electronic stabilization program)-data (power transmission system)

Channel 051: ESP (electronic stabilization program)-data (braking)

Channel 081: Self-adaptation values (vehicle data)

Channel 081: Self-adaptation values (vehicle data)

Channel 002: Maintenance reminding lamp

Channel 003: Fuel consumption display

Channel 004: Language

Channel 005: Maintenance reminding-maximum distance for engine oil replacement

Channel 006: Maintenance reminding-maximum distance

Channel 007: Maintenance reminding-maximum time

Channel 009: Distance (with 10km as unit)

Channel 010: Maintenance remind-distance for engine oil replacement

Channel 011: Maintenance remind-distance

Channel 012: Maintenance remind-time

Channel 016: Distance pulse identifier (only read)

Channel 017: Self-adaptation cruise control (ACC)

Channel 018: Extra heater

Channel 019: Radio control clock

Channel 021: Immobilizer-key self-adaptation

Channel 022: Production mode

Channel 025: Safety belt warning

Channel 027: Fuel tank features (fuel level sensor 4)

Channel 028: Fuel tank features (fuel level sensor 3)

Channel 029: Fuel tank features (fuel level sensor 2)

Channel 030: Fuel tank features (fuel level sensor 1)

Channel 031: Fuel tank features (humidity calibration)

Channel 032: Fuel tank features (failure to detect the fuel tank volume)

Channel 033: Fuel tank features (all calibration)

Channel 034: Fuel tank features (drying calibration)

Channel 035: Speed valve value

Channel 038: Minimum test of engine oil

Channel 039: Self-adaptation of engine oil level sensor

Channel 040: Mileage after maintenance

Channel 041: Time after maintenance

Channel 042: Minimum mileage until the next maintenance

Channel 043: Maximum mileage until the next maintenance

Channel 044: Maximum time until the next maintenance

Channel 045: engine oil quality

Channel 046: Total consumption (only limited to gas)

Channel 047: Soot input (only limited to diesel vehicle)

Channel 048: Heat load (only limited to diesel vehicle)

Channel 049: Minimum time until the next maintenance

Channel 050: Immobilizer-vehicle data self-adaptation

Channel 050: With fixed maintenance interval as standard, fundamental distance value until the next engine oil replacement

Channel 051: With fixed maintenance interval as standard, fundamental time value until the next engine oil replacement

Channel 060: Power transmission system CAN-data bus

Channel 061: Comfort mode CAN-data bus

Channel 062: Entertainment system CAN- data bus

Channel 099: Transport mode

Channel 001: Immobilizer (key self-adaptation)

Channel 021: Immobilizer (key self-adaptation)

Channel 050: Immobilizer (vehicle data self-adaptation)

Channel 001: Suspension calibration starting point, front left wheel data input

Channel 002: Front right wheel data input

Channel 003: Rear left wheel data input

Channel 004: Rear right wheel data input

Channel 005: Confirm the measurement values to be saved by inputting the new value 1

Channel 010: You can turn off or turn on the altitude control system

Channel 001: Remote control self-adaptation

Channel 002: Unlocking twinkling

Channel 003: Locking twinkling

Channel 003: Automatic locking

Channel 004: Automatic unlocking

Channel 005: Internal monitoring

Channel 006: Unlocking loudspeaker

Channel 007: Locking loudspeaker

Channel 008: Unlocking twinkling

Channel 009: Locking twinkling

Channel 010: Country setting

Channel 021: Remote control self-adaptation (position of memory)

Channel 002: Malfunction indicator lamp (MIL)

Channel 003: Driver's steering reminding (DSR)

Channel 004: Parking steering assistance system

Channel 000: Remote control deleted

Channel 001: Individualization-key 1

Channel 001: Remote control self-adaptation

Channel 002: Individualization-key 2

Channel 002: Automatic locking setting

Channel 003: Automatic unlocking setting

Channel 003: Individualization-key 3

Channel 003: Automatic locking

Channel 004: Automatic unlocking

Channel 004: Individualization-key 4

Channel 004: Enter the system unlocking reminding setting by keyless access

Channel 005: Internal monitoring

Channel 005: Remind setting by remote control button unlocking reminding

Channel 006: Unlocking loudspeaker

Channel 006: Remind setting by door lock unlocking reminding

Channel 007: Locking loudspeaker

Channel 007: Enter the system unlocking reminding setting by keyless access

Channel 008: Unlocking twinkling

Channel 008: Confirm setting by remote control button locking

Channel 009: Locking twinkling

Channel 009: Confirm setting by door lock locking reminding

Channel 010: Country setting

Channel 010: Reminding with door at "safety" status (inapplicable to NAR)

Channel 011: Alarm sound type (regulated based on noise)

Channel 012: Safety configuration

Channel 013: Alarm loudspeaker adjustment

Channel 014: Tilt sensor (alarm threshold)

Channel 015: Internal testing sensitivity

Channel 016: Battery tested by alarm

Channel 017: Comfort mode function (remote control)

Channel 018: Alarm retarded

Channel 022: J605 controller (automatic trunk lid) self-adaptation - off-position

Channel 023: J605 controller (automatic trunk lid) self-adaptation - opened position

Channel 024: J605controllor (automatic trunk lid) self-adaptation-scope of activity

Channel 025: Activate window and roof control by remote control key

Channel 026: In accordance with the maintenance manual, if the disordered key is used for unlocking, the vehicle unlocking alarm will be activated 15 seconds in delay.

Channel 027: Complete unknown function-please turn on module 3 to get more information

Channel 050: Self-adaptation control lamp

Channel 060: Personal information

Channel 061: Comfort function

Channel 062: Central locking function

 

Channel 005: Turn on the rear parking brake to replace the gasket

Channel 006: Closed rear parking brake

Channel 007: Turn on rear parking brake to facilitate repair

Channel 010: Parking brake function test

Channel 020: Longitudinal acceleration sensor adjustment (G251)

Channel 001: Transmitter type

Channel 003: Self-adaptation starting assistance system

Channel 006: Gasket thickness (range: 3-14mm)

Channel 020: Rear left brake self-adaptation

Channel 021: Rear right brake self-adaptation

Channel 001: Tire pressure testing

Channel 004: Tire-pressure self-adaptation

Channel 005: Rated tire pressure under full load (front axle)

Channel 006: Rated tire pressure under part load (front axle)

Channel 007: Rated tire pressure under full load (rear axle)

Channel 008: Rated tire pressure under part load (rear axle)

Channel 017: Antenna diagnosis

1. Engine

1.1 Basic setting 1.2 Adaptation

2. Auto Trans

2.1 Basic setting

3. ABS Brakes

3.1 Basic setting

4. Auto HVAC

4.1 Basic setting 4.2 Adaptation

5. Airbags

5.1 Basic setting 5.2 Adaptation

6. Steering wheel

6.1 Adaptation

7. Instruments

7.1 Adaptation

8. Immobilizer

8.1 Adaptation

9. Level Control

9.1 Adaptation

10. Centr.Locks

10.1 Adaptation

11. Steering Assist

11.1 Adaptation

12. Central Conv.

12.1 Adaptation

13. Parking Brake

13.1 Basic setting 13.2 Adaptation

14. Tire Pressure

14.1 Adaptation

B.Automotive professional Noun abbreviate for BMW

Automotive professional Noun abbreviations in BMW

ABS/ASC/DSC Dynamic Stability control

ACC Active Cruise Control

ACSM Crash Safety Module

AHL Adaptive directional headlights

AHM Trailer module

AL active steering

ALBBF Active backrest width, front passenger

ALBFA Active backrest width, driver

AMP Amplifier

AMPH Hi-Fi amplifier

AMPT Top Hi-Fi amplifier

ANT Antenna/antenna tuner

ARS Dynamic Drive

ASK Audio system controller

BM On-board monitor

BM/MIR (On-board monitor/Multi-Information Radio)

BZM Control center, center console

CA Comfort access system

CAN communication analysis

CAS Car Access System

CCC-A Applications

CCC-ANT Aerial tuner

CCC-ASK Audio system controller

CCC-BO User interface

CCC-GW Gateway

CD Control Display

CDC CD Changer

CD-GW Control Display(Gateway)

CEM Clean Energy Module

CHAMP-BO User interface

CHAMP-GW Gateway

CIC User interface

CIC-GW Gateway

CID Central Information Display

CIM Chassis integration Module

CON Controller

CVM Convertible top module

DAB Digital tuner

DDE Diesel Electronics

DME Digital Motor Electronics

DDE Diesel Electronics

DSC Dynamic Stability Control

DSP Digital Sound Processor

DVD CD Changer

DVD-C DVD changer

DWA anti-theft alarm system

EDC Electronic Damper Control

EDCSHL Damper satellite, rear left

EDCSHR Damper satellite, rear right

EDCSVL Damper satellite, front left

EDCSVR Damper satellite, front right

EGS transmission control

EHC Electronic Height Control

EHC/EHC2 (Electronic ride-level control)

EHPS Electro-hydraulic steering assistance

EKP Fuel pump

EKPS Fuel-pump control

EMF Parking brake

EML Electronic engine-power control

EPS Electronic Power Steering

EWS Electronic immobilizer

FBI Flexible Bus Interface

FBZM Rear compartment, control center, center console

FCON Rear compartment controller

FD Rear-compartment display

FID Read-compartment information display

FKA Rear-compartment air conditioning

FLA High Beam Assist

FRM Footwell module

FRM2 Footwell module 2

FZD Function Centre, roof

GR Cruise control

GWS Gear selector switch

HKL Rear-lid lift

HKL Rear-lid module

HUD Head-Up Display

ICM Integrated Chassis Management

IHKA Integrated heating /air conditioning

IHKA/IHKR Integrated heating/air conditioning

IHKS Integrated heating/air-conditioning control

INSTR Instrument cluster

JBE Junction-box electronics

JNAV Navigation system, Japan

KBM Body basic module

KGM Body Gateway Module

KHI Headphones interface

KNAV Navigation system, Korea

KOM Instrument cluster

KOM/IKE/IKI/INSTR(Instrument cluster)

KOMBI2 additional Instruments

LEW Steering–angle sensor

LEW/LWS (Steering angle sensor)

LM Lights Module

LRA Automatic headlight vertical aim control

LRR Long Range Radar

LSZ/LCM (Lights switching center)

M-ASK-BO User interface

M-ASK-GW Gateway

M-ASK-NAV Navigation system

MFL Multi-function steering wheel

MID Multi Information Display

MOST system analysis

MPM Micro-power module

MRS Multiple Restraint System

NAV Navigation computer

NVE Night Vision Electronics

NVK Night vision camera

PDC Park Distance Control

PM Power module

QMVHL Lateral-moment distribution, rear axle

RAD Radio

RAD2-BO User interface

RAD2-GW Gateway

RDC Tire pressure control

RDC Type Pressure control

RDC/RDW Tyre pressure check

RFK Reversing camera

RLS Rain/Light Sensor

RLS/AIC (Rain/Light Sensor/Automatic interval Control)

RLSS Rain/light solar sensor

SASL Satellite ,A-pillar, left

SASR Satellite, A-pillar, right

SBSL Satellite-pillar ,left

SBSR Satellite-pillar, right

SDARS Satellite tuner (US)

SEC1 Supplementary control unit 1

SEC2 Supplementary control unit 2

SES Language-input system

SFZ Satellite vehicle center

SG-FD Control unit, rear-compartment display

SG-FD-GW Control unit, rear-compartment display(gateway)

SGM-SIM Safety and Gateway Module(SIM)

SGM-ZGM Safety and Gateway Module(ZGM)

SHD Slide/tilt sunroof 2

SHZH Independent/auxiliary heater

SIM Safety and information module

SINE Siren with tilt sensor

SMBF Seat module, passenger

SMBFH Seat module, passenger’s side, rear

SMF/SM/SLM (Seat memory ,driver)

SMFA Seat module, driver

SMFAH Seat module, driver’s side, rear

SPMBT Mirror memory, passenger

SPMFT Mirror memory, driver

SSBF Satellite, seat, passenger

SSFA Satellite, seat, driver

SSH Satellite, seat, rear

STH park heating

STVL Satellite, door, front left

STVR Satellite, door ,front right

SVS Language processing system

SVT Servotronic

SZL Switch center, steering column

SZM Switching center ,center console

TCU Telematics control unit

TCU/ULF/TEL/BIT (Telematics Control unit)

TEL Telephone

TMBF Door module, front passenger

TMBFH Door module, passenger’s side, rear

TMBFT Door module, passenger door

TMFA Door module, driver

TMFAH Door module, driver’s side, rear

TMFAT Door module, driver’s door

ULF Universal charging and hands-free facility

ULF-SBX-H Interface box High

VDM Vertical Dynamics Management

VID Video module

VM Video Module

VTC Valvetronic

VTG Transfer case

WIM Wiper module

ZGM Central Gateway Module

ZKE Central body electronics BC 1

ZKE/GM (Central body electronics/GM base modul

C.Automotive professional Noun abbreviate for Mercedes-Benz

AAC - Automatic air conditioning

AB - Airbag

ABC - ABC active body control

ABR - Adaptive Brake

ABS - Anti-lock brake system

ACL[ZLB] - Air brake(spoiler)and central locking control unit

ACS - Automatic clutch system

ADS - Adaptive damping system

AG - Automatic transmissions for V6 engines

AGN - Automatic transmissions

AGW - Audio gateway

AHE - Trailer recognition

AIRmatic

ALWR - Headlamp range adjustment

APS - Auto pilot system

ASSYST - Active Service System

ASSYST PLUS - PLUS Active Service System

ATA - Anti-theft alarm system

BAS - Brake assist

BCM - Battery control module

BNS - Vehicle power supply control module

C-AAC - Convenience automatic air conditioning

CCM - Multifunction control module

CDC - CD changer

CDI - Common Rail Diesel Injection

CGW - Central gateway

CL - Central locking

CM - Compass module

COMAND - COMAND with integral telematics gateway(MOST network management, diagnosis gateway)

COU[ZBE] - Central operating unit( Telematics CAN bus )

CR - Common rail

CRN - Center roof node

CTEL - Fixed installation cellular telephone

DAS - Drive authorization system

DCM1 - Door control module front driver side

DCM2 - Door control module front passenger side

DCM3 - Door control module rear driver side

DCM4 - Door control module rear passenger side

DCM-FL - Door control module front left

DCM-FR - Door control module front right

DCM-L - Door control module left

DCM-R - Door control module right

DCM-RL - Door control module rear left

DCM-RR - Door control module rear right

DM - Diagntic Module

DN - Dynamic navigation by means of CTEL(K-wire)

Driver-side SAM - Front signal acquisition and actuation module

DS-LF - Left front dynamic seat

DSP - Pneumatic pump for dynamic seat

DS-RF - Right front dynamic seat

DTR - Distronic

EAM - Extended activity module(As of module year 2000)

ECM - Engine control monolith

EGS - Electronic transmission control

EIS - Electronic ignition switch

KG - keyless Go(Special equipment)

EPB - Electric parking brake

ENR - Electronic level control

ERA - Electric fold-down backrest system(3rd seat row)

ERE - Electronic inline

ES - Electrical power steering

ESA driver - Electric seat adjustment driver

ESA passenger - Electric seat adjustment front passenger

ESA-FL - Electric seat adjustment front left

ESA-FR - Electric seat adjustment front right

ESA-LR - Left rear electrical seat adjustment

ESA-RR - Right rear electrical seat adjustment

ESA-R - Electric seat adjustment rear

ESM - Electronic selector module

ESP - Electronic stability program

ETC - Electronic transmission control

EVE - Electronic distributor injection

EZS - Electronic ignition lock

FCVT - Continuously variable automatic transmission

FSCU - Control unit Fuel pump

FTC - Front transmission control

GM - General Module

GRM - Gear recognition module

HBF - Rear control field

HEAT/TAC - Automatic heater + PTC heater booster/Automatic temperature control

HFM-SFI - Hot film engine management

HFS - Hands free system and microphone

HLCM-L - Left headlamp control module

HLCM-R - Right headlamp control module

HRA - Headlamp range adjustment

HRA-FL - Front left headlamp range control

HRA-FR - Front right headlamp range control

HS - Seat heater

HSW - Heated steering wheel

HZR - Heating control

IC - Instrument cluster

ICM - Instrument cluster with maintenance interval display

IFI - Electronic in-line injection system diesel

DFI - Electronic distributor injection system diesel

ISM - Intelligent servo module

ISM - Shift module

KBE-H -Rear A/C operating unit

KE - Keyless Entry

KFB

KG - Keyless Go

KI - Instrument cluster

KR - Combination relay

LCP - Lower control panel

LDCA - Electric left door closing assist

LH - Fuel System

LWR

MB Portal - Telematics services WAP,E-mail, Mercedes-Benz Portal

MCS navigation in MCS

MCS CD - CD player in MCS

ME - Fuel injection and ignition system

ME 9.7 - Motor electronics 9.7

ME1LI

ME1RE

MKL-HL - Rear left multicontour backrest

MKL-HR - Rear right multicontour backrest

MSS - Special vehicle multifunction control module

NAVI - Navigation(Only in combination with COMAND)

NSA - Night vision assist

OCP - Overhead control panel

On-board electrical system (voltage supply)

OSB-FL - Multicontour backrest front left

OSB-FR - Multicontour backrest front right

OSB-R - Multiicontour backrest rear

Pass-side SAM - Passenger-side signal acquisition and actuation module

PSE - Pneumatic system equipment

PFK

PML

PMS

PSE - Pneumatic system equipment

PTC - Electric heater booster

PTS - Parktronic system

PWC

RCL

RCM - Rear control module

RDCA - Electric right door closing assist

REAR AC - Rear air conditioning

REAR SAM - Rear signal acquisition and actuation module

REDC - Rear-end door closing control module

RevETR-LF - Left front reversible emergency tensioning retractor

RevETR-RF - Right front reversible emergency tensioning retractor

RFK - Backup camera

RFL - Radio frequency locking/electric central locking

RSAM - Rear signal acquisition and actuation module

RFL(DAS2) - Radio frequency locking(drive authorization stage 2)

RVC - Rollover bar/vario roof control module

SAM - Signal acquisition and actuation module

SAM-F - Signal acquisition and actuation module front

SAM-FL - Front left signal acquisition and actuation module

SAM-FR - Front right signal acquisition and actuation module

SBC - Sensotronic Brake Control

SBCL - Sensotronic Brake Control Left

SBCR - Sensotronic Brake Control Right

SCM - Steering column module

SDAR - Satellite digital audio radio

SDE-H - Rear sliding/tilting sunroof unit

SEM - Security Module

SGR - Radar sensors control unit

SOUND - Sound system

SPS - Speed-sensitive power steering

SRS - Supplemental restraint system

SSG Sprint shift transmission

STH - Stationary heater

STH/HB - Stationary heater/Heater booster

Suspension

SVMCM - Special vehicle multifunction control module

System diagnosis

TAC - Automatic temperature control

TEL - Telephone control unit

TELE - TELE AID

TELE AID - Telematics system(K-wrie)

TELE AID, E-call or cellular telephone - Telematics system(K-wire)

TLC - Trunk lid control

TPC - Tire pressure monitor

Transmission

TSG Door control module

TSG-VL Door control module left

Tuner - Radio tuner with amplifier

TV - TV tuner

UCP - Upper control panel

UMI - Navigation 20 (N125/2)

V6 - 6-cylinder gasoline engine

VBF - Front control panel

VCS - Voice control system

VG - Transfer case

VGSNAG2 (722.9) - Fully integrated transmission control unit (Y3/8n4)

VP - Vacuum pump brake booster

VR - Vario roof

WSP - Immobilizer

WSS - Weight sensing system

XALWA-L - Xenon headlamp, left

XALWA-R - Xenon headlamp, right

ZAN - Central Display

ZBE - Audio/COMAND operating unit